This is an outdated, inactive version of this case. Go to the current version.
Technologies
Inactive

Sugar Mill Wastewater Re-use for Irrigation [Philippines]

technologies_1914 - Philippines

Completeness: 86%

1. General information

1.2 Contact details of resource persons and institutions involved in the assessment and documentation of the Technology

Key resource person(s)

land user:

Perater, Jr. Feliciano

BUSCO Sugar Milling Co., Inc.

Butong, Quezon, Bukidnon

Philippines

SLM specialist:

Betonio Gloria

agri10cdo@gmail.com / ictu10@yahoo.com.ph

Department of Agriculture-Regional Field Office 10

Antonio Luna Street, Cagayan De Oro City, Misamis Oriental, 9000, Philippines

Philippines

Raquid Jemar

bswmclientcenter@yahoo.com

Bureau of Soils and Water Management

Visayas Avenue corner Elliptical Road, Diliman, Quezon City, Philippines 1101

Philippines

Adel Dianne Michelle

bswmclientcenter@yahoo.com

Bureau of Soils and Water Management

Visayas Avenue corner Elliptical Road, Diliman, Quezon City, Philippines 1101

Philippines

Benavidez Ryan

bswmclientcenter@yahoo.com

Bureau of Soils and Water Management

Visayas Avenue corner Elliptical Road, Diliman, Quezon City, Philippines 1101

Philippines

Name of project which facilitated the documentation/ evaluation of the Technology (if relevant)
Decision Support for Mainstreaming and Scaling out Sustainable Land Management (GEF-FAO / DS-SLM)
Name of the institution(s) which facilitated the documentation/ evaluation of the Technology (if relevant)
Bureau of Soils and Water Management (Bureau of Soils and Water Management) - Philippines

1.3 Conditions regarding the use of data documented through WOCAT

When were the data compiled (in the field)?

05/10/2016

The compiler and key resource person(s) accept the conditions regarding the use of data documented through WOCAT:

Ja

1.4 Declaration on sustainability of the described Technology

Is the Technology described here problematic with regard to land degradation, so that it cannot be declared a sustainable land management technology?

Nee

2. Description of the SLM Technology

2.1 Short description of the Technology

Definition of the Technology:

Re-using of wastewater to support agricultural crop production, as well as, to help in environmental protection

2.2 Detailed description of the Technology

Description:

With increasing water demand and with the changing climate, water availability or water security is critical for the agriculture sector as this resource is a fundamental prerequisite in crop production. Various solutions are tapped and one of it is harnessing the potential of wastewater to be used for irrigation.

In the Philippines, one of the companies that utilize their treated wastewater is the BUSCO SUGAR MILLING CO., INC. located in Brgy. Butong, Quezon, Bukidnon. This treated wastewater is currently being re-used as irrigation water for the BUSCO Cane Farms areas, adjacent to the Mill Site covering 493 hectares and also to their leased adjacent 323-ha agricultural land.

Primarily, water as an industrial by-product is evident in both raw and refined sugar milling process. Volume of wastewater can be generated in the following sources or stations of sugar production: mill and cane handling station, process and/or boiling house, refinery house, and boiler house. In BUSCO, this wastewater all goes to their common wastewater treatment plant with a capacity of 100,000 volumetric meter and uses primary and secondary treatment.

The treatment started with the screening of influent (waste water) which passes through a motor driven conveyor type system to separate the solid waste such as bagasse, bagacillo, silt/mud, sand, and trash canes. After the screening, it now proceeds to the oil/grease separation at the separator tank. Oil and grease that usually floats were removed via manual skimming. The next treatment process is called neutralization wherein the acidic influent (phof 4.0–5.0) will be added with chemicals (i.e. Lime and/or caustic soda) to neutralize and maintain the pH at 6.0–8.0. The neutralized wastewater is then impounded in a digester tank to undergo the process of digestion. Enzymes or bacteria are being introduced to enhanced biodegradation. Aeration is also applied to minimize suspended solids and scum formation. After this, wastewater is transferred to the lagoon for primary aeration process. Lagoons are belted with air diffuser membrane to produced fine bubbles and efficiently dissolved oxygen. Waste water was aerated and polluting substance decomposed. Further, the wastewater and the activated sludge are again mixed and aerated in the secondary and tertiary aeration where the polluting substances are further decomposed by oxidation and are absorbed. Finally, it will store in the final settling pond which will then be utilized for irrigation. The treated wastewater in BUSCO has a Biological Oxygen Demand (BOD) value of 50mg/L which is within the prescribed standard BOD parameters of wastewater quality to be used for crop irrigation (< 150mg/L).

Irrigation is done through the hand move spray irrigation system. It uses aluminum pipes backed by centrifugal pumps and spray nozzles. Aside from supporting the sugarcane water requirement particularly during dry months, the treated wastewater/effluent contains nutrients (Nitrogen- 2.5mg/L; Phosphorus- 3.8 mg/L; Potassium- 3.8 mg/L) which reduce fertilizer requirements of the sugarcane farm.

2.3 Photos of the Technology

2.5 Country/ region/ locations where the Technology has been applied and which are covered by this assessment

Country:

Philippines

Region/ State/ Province:

Bukidnon

Further specification of location:

Butong, Quezon

2.6 Date of implementation

If precise year is not known, indicate approximate date:
  • 10-50 years ago

2.7 Introduction of the Technology

Specify how the Technology was introduced:
  • through land users' innovation

3. Classification of the SLM Technology

3.1 Main purpose(s) of the Technology

  • reduce, prevent, restore land degradation
  • conserve ecosystem
  • protect a watershed/ downstream areas – in combination with other Technologies

3.2 Current land use type(s) where the Technology is applied

Cropland

Cropland

  • Annual cropping
Main crops (cash and food crops):

sugarcane

3.3 Further information about land use

Water supply for the land on which the Technology is applied:
  • mixed rainfed-irrigated
Number of growing seasons per year:
  • 2

3.4 SLM group to which the Technology belongs

  • waste management/ waste water management

3.5 Spread of the Technology

Specify the spread of the Technology:
  • evenly spread over an area
If the Technology is evenly spread over an area, indicate approximate area covered:
  • 1-10 km2

3.6 SLM measures comprising the Technology

structural measures

structural measures

  • S8: Sanitation/ waste water structures
management measures

management measures

  • M6: Waste management (recycling, re-use or reduce)

3.7 Main types of land degradation addressed by the Technology

water degradation

water degradation

  • Hp: decline of surface water quality

3.8 Prevention, reduction, or restoration of land degradation

Specify the goal of the Technology with regard to land degradation:
  • reduce land degradation

4. Technical specifications, implementation activities, inputs, and costs

4.1 Technical drawing of the Technology

Author:

BUSCO Sugar Milling Co.

4.2 Technical specifications/ explanations of technical drawing

Wastewater treatment flow diagram of BUSCO. The treatment started with the screening of influent (waste water) which passes through a motor driven conveyor type system to separate the solid waste such as bagasse, bagacillo, silt/mud, sand, and trash canes. After the screening, it now proceeds to the oil/grease separation at the separator tank. Oil and grease that usually floats were removed via manual skimming. The next treatment process is called neutralization wherein the acidic influent (phof 4.0–5.0) will be added with chemicals (i.e. Lime and/or caustic soda) to neutralize and maintain the pH at 6.0–8.0. The neutralized wastewater is then impounded in a digester tank to undergo the process of digestion. Enzymes or bacteria are being introduced to enhanced biodegradation. Aeration is also applied to minimize suspended solids and scum formation. After this, wastewater is transferred to the lagoon for primary aeration process. Lagoons are belted with air diffuser membrane to produced fine bubbles and efficiently dissolved oxygen. Waste water was aerated and polluting substance decomposed. Further, the wastewater and the activated sludge are again mixed and aerated in the secondary and tertiary aeration where the polluting substances are further decomposed by oxidation and are absorbed. Finally, it will store in the final settling pond which will then be utilized for irrigation. The treated wastewater in BUSCO has a Biological Oxygen Demand (BOD) value of 50mg/L which is within the prescribed standard BOD parameters of wastewater quality to be used for crop irrigation (< 150mg/L).

4.3 General information regarding the calculation of inputs and costs

Specify how costs and inputs were calculated:
  • per Technology unit

4.4 Establishment activities

Activity Type of measure Timing
1. Establishment of Waste Water Treatment Facilities Structural
Comments:

information not available.

4.5 Costs and inputs needed for establishment

Comments:

information not available. The Company bore 100% of the cost.

4.6 Maintenance/ recurrent activities

Comments:

information not available. The Company bore 100% of the cost.

4.7 Costs and inputs needed for maintenance/ recurrent activities (per year)

Comments:

information not available. The Company bore 100% of the cost.

5. Natural and human environment

5.1 Climate

Annual rainfall
  • < 250 mm
  • 251-500 mm
  • 501-750 mm
  • 751-1,000 mm
  • 1,001-1,500 mm
  • 1,501-2,000 mm
  • 2,001-3,000 mm
  • 3,001-4,000 mm
  • > 4,000 mm
Agro-climatic zone
  • humid

5.2 Topography

Slopes on average:
  • flat (0-2%)
  • gentle (3-5%)
  • moderate (6-10%)
  • rolling (11-15%)
  • hilly (16-30%)
  • steep (31-60%)
  • very steep (>60%)
Landforms:
  • plateau/plains
  • ridges
  • mountain slopes
  • hill slopes
  • footslopes
  • valley floors
Altitudinal zone:
  • 0-100 m a.s.l.
  • 101-500 m a.s.l.
  • 501-1,000 m a.s.l.
  • 1,001-1,500 m a.s.l.
  • 1,501-2,000 m a.s.l.
  • 2,001-2,500 m a.s.l.
  • 2,501-3,000 m a.s.l.
  • 3,001-4,000 m a.s.l.
  • > 4,000 m a.s.l.
Indicate if the Technology is specifically applied in:
  • not relevant

5.3 Soils

If available, attach full soil description or specify the available information, e.g. soil type, soil PH/ acidity, Cation Exchange Capacity, nitrogen, salinity etc.

Soils are not relevant for this Technology.

5.4 Water availability and quality

Availability of surface water:

good

Water quality (untreated):

good drinking water

Is water salinity a problem?

Nee

Is flooding of the area occurring?

Nee

5.5 Biodiversity

Species diversity:
  • high
Habitat diversity:
  • high

5.6 Characteristics of land users applying the Technology

Sedentary or nomadic:
  • Sedentary
Market orientation of production system:
  • commercial/ market
Individuals or groups:
  • groups/ community
  • employee (company, government)
Level of mechanization:
  • mechanized/ motorized
Gender:
  • women
  • men
Age of land users:
  • middle-aged
  • elderly

5.7 Average area of land owned or leased by land users applying the Technology

  • < 0.5 ha
  • 0.5-1 ha
  • 1-2 ha
  • 2-5 ha
  • 5-15 ha
  • 15-50 ha
  • 50-100 ha
  • 100-500 ha
  • 500-1,000 ha
  • 1,000-10,000 ha
  • > 10,000 ha

5.8 Land ownership, land use rights, and water use rights

Land ownership:
  • company
  • individual, titled
Land use rights:
  • leased
  • individual
Water use rights:
  • open access (unorganized)

5.9 Access to services and infrastructure

health:
  • poor
  • moderate
  • good
education:
  • poor
  • moderate
  • good
technical assistance:
  • poor
  • moderate
  • good
employment (e.g. off-farm):
  • poor
  • moderate
  • good
markets:
  • poor
  • moderate
  • good
energy:
  • poor
  • moderate
  • good
roads and transport:
  • poor
  • moderate
  • good
drinking water and sanitation:
  • poor
  • moderate
  • good
financial services:
  • poor
  • moderate
  • good

6. Impacts and concluding statements

6.1 On-site impacts the Technology has shown

Socio-economic impacts

Production

crop production

decreased
increased
Water availability and quality

irrigation water availability

decreased
increased
Income and costs

expenses on agricultural inputs

increased
decreased

Ecological impacts

Water cycle/ runoff

water quantity

decreased
increased
Soil

nutrient cycling/ recharge

decreased
increased
Climate and disaster risk reduction

drought impacts

increased
decreased

6.2 Off-site impacts the Technology has shown

groundwater/ river pollution

increased
reduced

6.5 Adoption of the Technology

  • single cases/ experimental
Of all those who have adopted the Technology, how many have did so spontaneously, i.e. without receiving any material incentives/ payments?
  • 90-100%
Comments:

The BUSCO Sugar Milling did it spontaneously without receiving payments. Reduction in the wastewater discharge fee since the BOD level of the treated wastewater is within the allowable range.

6.6 Adaptation

Has the Technology been modified recently to adapt to changing conditions?

Nee

6.7 Strengths/ advantages/ opportunities of the Technology

Strengths/ advantages/ opportunities in the land user’s view
• Source of irrigation during water shortage on dry months
• Additional source of nutrients thus decreasing the dependency on chemical fertilizers
• Eliminate/Reduce wastewater discharge on water bodies thus reduction of water pollution
• Complying to the environmental standards
• Savings on wastewater discharge fee of the industrial company
Strengths/ advantages/ opportunities in the compiler’s or other key resource person’s view
Contribute in the elimination or reduction of water pollution in the near-by water bodies.
Complying to the environmental standards.
Water availability particularly during dry months.

6.8 Weaknesses/ disadvantages/ risks of the Technology and ways of overcoming them

Weaknesses/ disadvantages/ risks in the land user’s view How can they be overcome?
none
Weaknesses/ disadvantages/ risks in the compiler’s or other key resource person’s view How can they be overcome?
Investment cost. Optimizing the operation of the treatment facility;
possible utilization of other wastes like sludge, mill ash, and mudpress into soil conditioner or fertilizer

7. References and links

7.1 Methods/ sources of information

  • field visits, field surveys
  • interviews with land users

7.3 Links to relevant information which is available online

Title/ description:

not available

Links and modules

Expand all Collapse all

Modules