1.2 Contact details of resource persons and institutions involved in the assessment and documentation of the Technology

Name of the institution(s) which facilitated the documentation/ evaluation of the Technology (if relevant)

CDE Centre for Development and Environment (CDE Centre for Development and Environment) - Switzerland

1.3 Conditions regarding the use of data documented through WOCAT

The compiler and key resource person(s) accept the conditions regarding the use of data documented through WOCAT:

Ja

1.5 Reference to Questionnaire(s) on SLM Approaches (documented using WOCAT)

2.1 Short description of the Technology

Definition of the Technology:

A cropping system for maize which reduces the reworking of the soil to the stripes, in which the seeds are planted.

2.2 Detailed description of the Technology

Description:

Maize strip tillage is a mixture between no tillage and conventional agriculture. The reworking of the soil greatly reduced. Instead of ploughing and harrowing a special rotary tiller including a grubber is being used. The working depht of the rotary tiller is 10-15cm, the grubber reaches to 20-25cm depht. The machine reworks the soil on stripes of 30cm width. This is where the seeds are planted. In between there are stripes of 45cm width, which are left untouched.
In Switzerland farms usually are small. A major part of the arable land is used to produce fodder. (For example maize, grain, fodder beet)
Usually maize strip tillage is being used to avoid soil erosion or for economical reasons. Compared to conventional agriculture several working steps can be saved. The reworking of the soil, manuring, seeding and applying of herbicides can be done at once.
Since the machine is expensive and a strong tractor is needed, farmers usually don’t buy it on their own. In most cases a contractor will be tasked to do this work. Of course this is not for free. But since several working step are saved, there is more time left to do other work (6.5h/ha).
The reduced reworking of the soil holds remarkable ecological advantages. Occurrence of erosion is very seldom, because the stripes covered by plant residual significantly reduce the speed of surface water. To increase this effect, the stripes are laid along the height countours, if possible. Since the soil structure is not disturbed in the stripes between the seeds, the risk of compaction is reduced there. For that reason maize strip tillage is often used before potatoes in a crop rotation. This is a crop that is very sensitive to soil compaction.
The technique brings along an ecological disadvantage, too. Before sowings the precedent crop needs to be treated with a total herbicide (glyphosat) to avoid unwanted competition. Only in wet areas, where there is enough water available it is possible to not use glyphosat. Also in long time studies, residues of glyphosat could not be detected in the soil. But if ever weeds will develop a resitance against it, that would certainly be a major problem.
The enhanced risk of crop loss is another disadvantage of the technology. In conventional agriculture the soil is left to dry for a few days after ploughing. maize strip tillage does not hold that possibility. If the conditions are wet, risk of crop failure can be a problem. However, if conditions are good (dry enough), both quality and crop yield are similar to conventional agriculture.

2.3 Photos of the Technology

2.5 Country/ region/ locations where the Technology has been applied and which are covered by this assessment

2.6 Date of implementation

If precise year is not known, indicate approximate date:

• 10-50 years ago

2.7 Introduction of the Technology

Specify how the Technology was introduced:

• through land users' innovation

Comments (type of project, etc.):

The technology was developed some 12years ago by the designer and contractor Walter Witzig supported by researchers from Forschungsanstalt Reckenholz-Tänikon.

3.1 Main purpose(s) of the Technology

• reduce, prevent, restore land degradation

3.2 Current land use type(s) where the Technology is applied

Comments:

Major land use problems (land users’ perception): Soil erosion by water and soil compaction.

3.4 Water supply

Water supply for the land on which the Technology is applied:

• rainfed

3.5 SLM group to which the Technology belongs

• cross-slope measure

3.6 SLM measures comprising the Technology

Comments:

Main measures: agronomic measures

Type of agronomic measures: contour planting / strip cropping, minimum tillage

3.7 Main types of land degradation addressed by the Technology

Comments:

Main type of degradation addressed: Wt: loss of topsoil / surface erosion, Pc: compaction, Bc: reduction of vegetation cover

Secondary types of degradation addressed: Bl: loss of soil life

Main causes of degradation: crop management (annual, perennial, tree/shrub) (too deep and too intensive reworking of the soil.), Heavy / extreme rainfall (intensity/amounts), education, access to knowledge and support services (Tradition. Most people do not question tillage.), crop management (annual, perennial, tree / shrub) (too heavy machinery used under wet conditions.)

3.8 Prevention, reduction, or restoration of land degradation

Specify the goal of the Technology with regard to land degradation:

• prevent land degradation
• reduce land degradation

Comments:

Main goals: prevention of land degradation

Secondary goals: mitigation / reduction of land degradation

4.1 Technical drawing of the Technology

4.2 General information regarding the calculation of inputs and costs

other/ national currency (specify):

Swiss Franc

If relevant, indicate exchange rate from USD to local currency (e.g. 1 USD = 79.9 Brazilian Real): 1 USD =:

1.13

4.3 Establishment activities

	Activity	Timing (season)
1.	Buy a "Streifenfräse"
2.	Buy a tractor

4.4 Costs and inputs needed for establishment

	Specify input	Unit	Quantity	Costs per Unit	Total costs per input	% of costs borne by land users
Equipment	Streifenfräse	Machine	1.0	42000.0	42000.0	100.0
Equipment	Tractor	Machine	1.0	115000.0	115000.0	100.0
Total costs for establishment of the Technology					157000.0
Total costs for establishment of the Technology in USD					138938.05

Comments:

Duration of establishment phase: 0 month(s)

4.5 Maintenance/ recurrent activities

	Activity	Timing/ frequency
1.	application of glyphosat (total herbicide)	1 per growing period
2.	tillage of stripes including seeding, manuring, spraying of herbicide	1 per growing period

4.6 Costs and inputs needed for maintenance/ recurrent activities (per year)

	Specify input	Unit	Quantity	Costs per Unit	Total costs per input	% of costs borne by land users
Labour	tillage of stripes, seeding,	ha	1.0	393.0	393.0	100.0
Labour	appliance of total herbicide	ha	1.0	88.0	88.0	100.0
Fertilizers and biocides	Biocides	ha	1.0	53.0	53.0	100.0
Total costs for maintenance of the Technology					534.0
Total costs for maintenance of the Technology in USD					472.57

Comments:

Crop yield is about the same as in conventional cropping systems. The cost to apply the technology are about $410 per ha. It takes about 2 working hours per ha. In addition the glyphosat needs to be applied, which accounts for $150 or 0.75h of work. The following worksteps are not needed anymore (working hours, costs when tasking a contractor excl. material): Ploughing (1.25h, $260), harrowing (1.25h, $180), conventional seeding (1h, $100), manuring (1h, $50), applying of herbicides (0.75h, $90). In total about $130 and 4 hours of work can be saved per ha. In some cantons Streifenfrässaat is also subsidised. In the canton of bern this accounts for $420 per ha and year for the first 5 years of appliance. The costs for manure, herbicides, seeds are not included since they are the same as in conventional agriculture.

4.7 Most important factors affecting the costs

Describe the most determinate factors affecting the costs:

The machine is very expensive. In addition a strong tractor is needed (ca. 150hp). Thats why most farmer task a contractor with the seeding. In this case no initial investment needs to be done. The machine in this case study is used for about 60ha per year. A bigger workload would be possible.

5.1 Climate

5.2 Topography

5.3 Soils

If available, attach full soil description or specify the available information, e.g. soil type, soil PH/ acidity, Cation Exchange Capacity, nitrogen, salinity etc.

Soil fertility is high
Soil drainage/infiltration is good
Soil water storage capacity is high

5.4 Water availability and quality

Comments and further specifications on water quality and quantity:

Availability of surface water: good, medium ( precipitation maximum in summer )

5.5 Biodiversity

5.6 Characteristics of land users applying the Technology

Indicate other relevant characteristics of the land users:

Difference in the involvement of women and men: Ist mostly men that get in touch with the technology since it is mostly them who are using the machines. But decisions about which technology should be used are taken at the household level including both women and men.

Population density: 50-100 persons/km2

Annual population growth: 0.5% - 1%

Off-farm income specification: The farmer interviewed is working for other farmers, too. In general off-farm income is significantly lower.

5.7 Average area of land used by land users applying the Technology

5.8 Land ownership, land use rights, and water use rights

Land ownership:

• individual, titled

Land use rights:

• individual

Water use rights:

• communal (organized)

5.9 Access to services and infrastructure

6.1 On-site impacts the Technology has shown

Socio-economic impacts

Production

Income and costs

Socio-cultural impacts

Ecological impacts

Soil

Biodiversity: vegetation, animals

6.2 Off-site impacts the Technology has shown

6.3 Exposure and sensitivity of the Technology to gradual climate change and climate-related extremes/ disasters (as perceived by land users)

Gradual climate change

Gradual climate change

	Season	increase or decrease	How does the Technology cope with it?
annual temperature		increase	not known

Climate-related extremes (disasters)

Meteorological disasters

	How does the Technology cope with it?
local rainstorm	well
local windstorm	not known

Climatological disasters

	How does the Technology cope with it?
drought	well

Hydrological disasters

	How does the Technology cope with it?
general (river) flood	not known

Other climate-related consequences

Other climate-related consequences

	How does the Technology cope with it?
reduced growing period	not well

6.4 Cost-benefit analysis

How do the benefits compare with the establishment costs (from land users’ perspective)?

How do the benefits compare with the maintenance/ recurrent costs (from land users' perspective)?

Comments:

The farmer portaited bought a machine on his own. If a contractor were tasked short-returns would be positive too.

6.5 Adoption of the Technology

Of all those who have adopted the Technology, how many did so spontaneously, i.e. without receiving any material incentives/ payments?

• 11-50%

Comments:

80% of land user families have adopted the Technology with external material support

Comments on acceptance with external material support: There is the possibility to get subsidies. But resources are limited and therefore not everybody gets them. (See Approach)

20% of land user families have adopted the Technology without any external material support

There is a moderate trend towards spontaneous adoption of the Technology

Comments on adoption trend: The technology is not spreading homogenously. Adoption and acceptance varies very much in different regions. Pioneers play an important role.

6.7 Strengths/ advantages/ opportunities of the Technology

Strengths/ advantages/ opportunities in the land user’s view
The number of worksteps is greatly reduced. Thats why money and time can be saved. How can they be sustained / enhanced? Since less work needs to be done, the farmer can concentrate on other activities to enhance income.
Soil structure is improved. Risk of compaction is reduced. How can they be sustained / enhanced? Still heavy machinery should not be used under wet conditions.
Soil erosion is reduced very much. How can they be sustained / enhanced? The technology applies for maize only. Other conservation techniques should be used for other crops.

Strengths/ advantages/ opportunities in the compiler’s or other key resource person’s view
Steeper hills can be cultivated without risking erosion. How can they be sustained / enhanced? the stripes should in general be laid along the contours.

6.8 Weaknesses/ disadvantages/ risks of the Technology and ways of overcoming them

Weaknesses/ disadvantages/ risks in the land user’s view	How can they be overcome?
Risk of crop failure is enhanced if seeding under too wet conditions.	The time of seeding is critical and should be chosen carefully. If conditions are too wet, ploughing might be a better choice.
The machine is very expensive. Single farmers usually cannot afford it.	Cost can be shared with other parties or a contractor can be tasked.
In general a total herbicide must be applied before sowing.	The amount of glyphosat should be adapted to the number of weeds.

Weaknesses/ disadvantages/ risks in the compiler’s or other key resource person’s view	How can they be overcome?
Reworking of the soil is still intense.
A powerful tractor is needed. Fuel consumption is still high.

7.1 Methods/ sources of information

7.2 References to available publications

Title, author, year, ISBN:

report on DVD: von Bauern für Bauern

Available from where? Costs?

www.vonbauernfuerbauern.ch CHF 20.-