1.2 Contact details of resource persons and institutions involved in the assessment and documentation of the Technology

Name of the institution(s) which facilitated the documentation/ evaluation of the Technology (if relevant)

HELVETAS (Swiss Intercooperation)

Name of the institution(s) which facilitated the documentation/ evaluation of the Technology (if relevant)

People in Need (PIN) (People in Need (PIN)) - Afghanistan

1.3 Conditions regarding the use of data documented through WOCAT

When were the data compiled (in the field)?

18/05/2016

The compiler and key resource person(s) accept the conditions regarding the use of data documented through WOCAT:

نعم

2.1 Short description of the Technology

Definition of the Technology:

Technology for lifting water to uplands: hydraulic flange pump, reservoir and pipe scheme.

2.2 Detailed description of the Technology

Description:

This technology is documented by the Sustainable Land Management Project, implemented by HELVETAS Swiss Intercooperation and funded by the Swiss Agency for Development and Cooperation (SDC), with close support and cooperation of People in Need.
Samangan, Khuram wa Sarbagh district, Klor-e-Bala village is situated in a mountainous region where the greatest limiting factor to agricultural production is water. Arable lands are located far away from water sources. Lack of technology to exploit these lands prohibits villagers to cultivate their land to make a livelihood. Therefore, families are compelled to leave their village during summer.

Purpose of the Technology: To address this problem, People in Need (PIN), with financial support from GIZ and the Czech Embassy (CzDA) introduced irrigation through hydraulic flange pump. The hydraulic flange pump provides water to 30 orchards of Klor-e-Bala village, drinking water to the 43 village households, the mosque and the school of 500 students.

Establishment / maintenance activities and inputs: The main water source which starts and runs the hydraulic flange pump is the Khuwaja Hayat spring. The spring water arrives to the hydraulic flange pump from 1.8 meter height on a 12 percent slope in 200 meters distance from the water source. The water flow passes through the intake and moves towards the water wheel which starts/runs the hydraulic flange pump. The water is then pumped through three pipes of one inch to the reservoir. The hydraulic flange pump has the capacity of lifting water up to 250 meters.
The reservoir’s storage capacity is 25,600 liters of water with the dimensions as follows: 4.9 meter length; 2.9 m width; and 1.8 m height. It has two outlets: a spill way fitted with three pipes of one inch at the top of the reservoir and two outlets fitted with two pipes of three inches at the bottom. The lower outlet leads water to the orchards by diverting water after 40 meters into two pipes which are 1,000 meters long. Each orchard is connected to one of these two pipes by a T-connector and the water flows into a tin water tank with the capacity of 1,000 liters for each orchard. The two pipes are extended as far as the school which is located near the orchards and has been equipped with a 2000 liters tin water tank.
The hydraulic flange pump is made locally in Taloqan city, Takhar province of Afghanistan in the Baradaran-e- Kargar workshop. The pump costs 140,000 Afghani/ 2,200 US$, including installment. The estimated cost of the construction of the reservoir and the pump’s room including the hydraulic flange pump is 19,000 US$. The pipe scheme of the project was installed by the Community Development Council (CDC) with technical support from PIN’s engineering team. Community members contributed 10 percent of the costs as labor. As Klor-e-Bala village is situated in flood prone area and flooding is a common occurrence, PIN, with funding from the GIZ, constructed in 2015 two protection walls, 45 m and 55 m in length, on both sides of the river, to minimize erosion and protect the pump’s intake from floods. The protection walls were built through cash for work programme, but community members provided 10 percent contribution through labor and by providing stones for construction. The total estimated cost of the hydraulic flange pump, reservoir and pipe scheme technology amounted to 37,000 US$.
Furthermore, in order to maintain the technology, a caretaker, who lives close to the pump’s room has been appointed. The caretaker was trained by the technician who installed the hydraulic flange pump and has voluntarily taken the responsibility of maintenance activities; changing the oil and cleaning of the hydraulic flange pump's room and changing of the pipes in case of need. The owners of the orchards have to cover for all maintenance costs and the chairman of the Community Development Council (CDC) has the responsibility of managing the money for maintenance and other recurrent activities.
The flange pump technology contributed to the economic growth of the community members by increasing the orchards’ yields. Currently, the hydraulic flange pump irrigates 12 jireb/2.4 ha (30*800m2) orchards of apple, apricot, almond, pear and cherry trees. In addition to the orchards, alfalfa, potato, vegetables and other crops are as well cultivated on these lands. Furthermore, the pump supports the community members to settle year-round in their villages and prevents from their seasonal displacement. Moreover, the flange pump enables the provision of drinking water to the whole community and the school.

Natural / human environment: Samangan is one of the northern provinces of Afghanistan. Wheat, melons, pistachio,
almonds, potatoes, onions and caraway are important crops and Karakul sheep
and goats the main livestock for meat, dairy, and wool production. Rugs are the
main handicraft of this area. Khuram-wa-Sarbagh district in Samangan has two growing
seasons, the longest of which is 150 days from February to June and the second is 90
days from June to September. The average rainfall is below 500mm and the climate semi-arid.
The community members have limited access to off farm employment, market, energy,
financial services, roads and transportation and moderate access to health and education.

2.3 Photos of the Technology

2.5 Country/ region/ locations where the Technology has been applied and which are covered by this assessment

2.6 Date of implementation

If precise year is not known, indicate approximate date:

• less than 10 years ago (recently)

2.7 Introduction of the Technology

Specify how the Technology was introduced:

• through projects/ external interventions

3.1 Main purpose(s) of the Technology

• improve production

• access to water

3.2 Current land use type(s) where the Technology is applied

Comments:

Major land use problems (compiler’s opinion): Lack of safe drinking and irrigation water which makes agricultural activities difficult.

Major land use problems (land users’ perception): Lack of cultivation due to the scarcity of water. High workloads and small incomes.

Future (final) land use (after implementation of SLM Technology): Mixed: Mf: Agroforestry

If land use has changed due to the implementation of the Technology, indicate land use before implementation of the Technology:

Other: Ow: Waterways, drainage lines, ponds, dams

3.3 Further information about land use

Water supply for the land on which the Technology is applied:

• rainfed

Number of growing seasons per year:

• 2

حددها:

Longest growing period in days: 150; Longest growing period from month to month: February - June; Second longest growing period in days: 90; Second longest growing period from month to month: June - September

3.4 SLM group to which the Technology belongs

• natural and semi-natural forest management
• agroforestry
• irrigation management (incl. water supply, drainage)

3.5 Spread of the Technology

Specify the spread of the Technology:

• evenly spread over an area

If the Technology is evenly spread over an area, indicate approximate area covered:

• 1-10 km2

Comments:

The technology area which is considered here is the distance from the water area where the machine exists to the reservoir and reservoir to the orchard and crop land.

3.6 SLM measures comprising the Technology

3.7 Main types of land degradation addressed by the Technology

Comments:

Secondary types of degradation addressed: Bq: quantity / biomass decline

Main causes of degradation: disturbance of water cycle (infiltration / runoff), droughts, education, access to knowledge and support services

3.8 Prevention, reduction, or restoration of land degradation

Specify the goal of the Technology with regard to land degradation:

• restore/ rehabilitate severely degraded land

4.1 Technical drawing of the Technology

4.2 Technical specifications/ explanations of technical drawing

A detailed technical drawing of the hydraulic flange pump and the reservoir, Klor-e-Bala village, Khuram-wa-Sarbagh district, Samangan province.

Technical knowledge required for field staff / advisors: high

Technical knowledge required for land users: moderate

Main technical functions: improvement of ground cover, improvement of surface structure (crusting, sealing), improvement of topsoil structure (compaction), stabilisation of soil (eg by tree roots against land slides), water harvesting / increase water supply, water spreading

4.3 General information regarding the calculation of inputs and costs

Specify currency used for cost calculations:

• US Dollars

4.4 Establishment activities

	Activity	Type of measure	Timing
1.	Excavation of the foundation	Structural
2.	Construction activities,Stone masonry foundation and wall:	Structural
3.	a:P.C.C concrete foundationb:R.C.C concretec:Iron shattering for walls, roof and floord:External and internal pointing	Structural
4.	a:Plasteringb:Steel barsc:Door and window	Structural
5.	Pipe scheme:a:Pipesb:Water tanksc:other equipmentd:Skilled and unskilled labor	Structural
6.	Procurement of the Hydraulic flange pump	Structural

4.5 Costs and inputs needed for establishment

	Specify input	Unit	Quantity	Costs per Unit	Total costs per input	% of costs borne by land users
Labour	Excavation of the foundation	square meters	50,0	2,88	144,0	10,0
Labour	Excavation of the foundation	cubic meters	161,0	2,4037	387,0	10,0
Labour	Skilled and unskilled labor	persons/day	343,0	9,47521	3250,0	10,0
Equipment	Water tanks	pieces	39,0	98,615384	3846,0	10,0
Equipment	Pipes	meter	2900,0	2,9241379	8480,0	10,0
Equipment	Other equipment	all	1,0	2424,0	2424,0	10,0
Equipment	Procurement of the Hydraulic flange pump	pieces	1,0	2200,0	2200,0	10,0
Construction material	Concrete foundation	cubic meters	12,23	96,64758	1182,0	10,0
Construction material	Concrete	cubic meters	8,4	114,0476	958,0	10,0
Construction material	Iron shattering for walls, roof and floor	cubic meters	110,0	4,86363	535,0	10,0
Construction material	External and internal pointing	square meters	226,0	2,85398	645,0	10,0
Construction material	Plastering	square meters	32,0	5,9375	190,0	10,0
Construction material	Steel bars	square meters	364,4	1,21844	444,0	10,0
Construction material	Door and window	square meters	3,98	28,8944	115,0	10,0
Construction material	Stones	square meters	244,0	50,0	12200,0	10,0
Total costs for establishment of the Technology					37000,0

Comments:

Duration of establishment phase: 7 month(s)

4.6 Maintenance/ recurrent activities

	Activity	Type of measure	Timing/ frequency
1.	Changing of the pipes	Structural	Once a year
2.	Cleaning of the flange pump room	Structural	Six times a year
3.	Changing of the hydraulic flange pump oil	Structural

4.7 Costs and inputs needed for maintenance/ recurrent activities (per year)

	Specify input	Unit	Quantity	Costs per Unit	Total costs per input	% of costs borne by land users
Labour	Changing of the pipes	persons/day	1,0	7,0	7,0	100,0
Labour	Cleaning of the flange pump room	persons/day	1,0	7,0	7,0	100,0
Labour	Changing of the hydraulic flange pump oil	persons/day	1,0	7,0	7,0	100,0
Equipment	Pipes	meter	20,0	0,65	13,0	100,0
Equipment	Oil	times/year	4,0	4,5	18,0	100,0
Total costs for maintenance of the Technology					52,0

4.8 Most important factors affecting the costs

Describe the most determinate factors affecting the costs:

Labor, stone and equipment are the main fundamental factors which need high initial investments.
After a couple of years pipes may need to be changed.

5.1 Climate

5.2 Topography

5.3 Soils

If available, attach full soil description or specify the available information, e.g. soil type, soil PH/ acidity, Cation Exchange Capacity, nitrogen, salinity etc.

Soil fertility is medium

Soil drainage / infiltration is medium

Soil water storage capacity is low

5.4 Water availability and quality

5.5 Biodiversity

5.6 Characteristics of land users applying the Technology

Indicate other relevant characteristics of the land users:

Land users applying the Technology are mainly disadvantaged land users

Difference in the involvement of women and men: Constructional activities which are done outside of the houses and compounds are mainly applied by men in Afghanistan.

Population density: 10-50 persons/km2

Annual population growth: 2% - 3%

100% of the land users are poor.

5.7 Average area of land owned or leased by land users applying the Technology

5.8 Land ownership, land use rights, and water use rights

Land ownership:

• communal/ village

Land use rights:

• communal (organized)

Water use rights:

• communal (organized)

5.9 Access to services and infrastructure

6.1 On-site impacts the Technology has shown

Socio-economic impacts

Production

Water availability and quality

Income and costs

Socio-cultural impacts

Ecological impacts

Water cycle/ runoff

Soil

Biodiversity: vegetation, animals

Climate and disaster risk reduction

6.2 Off-site impacts the Technology has shown

6.3 Exposure and sensitivity of the Technology to gradual climate change and climate-related extremes/ disasters (as perceived by land users)

Gradual climate change

Gradual climate change

	Season	Type of climatic change/ extreme	How does the Technology cope with it?
annual temperature		increase	well
annual rainfall		increase	well

Climate-related extremes (disasters)

Meteorological disasters

	How does the Technology cope with it?
local rainstorm	not known
local windstorm	not well

Climatological disasters

	How does the Technology cope with it?
drought	well

Hydrological disasters

	How does the Technology cope with it?
flash flood	not well

Other climate-related extremes (disasters)

other (specify)	How does the Technology cope with it?
length of growing period	well

6.4 Cost-benefit analysis

How do the benefits compare with the establishment costs (from land users’ perspective)?

How do the benefits compare with the maintenance/ recurrent costs (from land users' perspective)?

6.5 Adoption of the Technology

• 10-50%

If available, quantify (no. of households and/ or area covered):

98 households covering 50 percent of the stated area

Of all those who have adopted the Technology, how many have did so spontaneously, i.e. without receiving any material incentives/ payments?

• 0-10%

Comments:

98 land user families have adopted the Technology with external material support

Comments on spontaneous adoption: Due to high expenses of the implementation of the technology, it has not been applied without any external support.

There is a little trend towards spontaneous adoption of the Technology

Comments on adoption trend: The technology is of a high cost and needs external support to be established.

6.7 Strengths/ advantages/ opportunities of the Technology

Strengths/ advantages/ opportunities in the land user’s view
Application of the technology has reduced the workload for the families. How can they be sustained / enhanced? Greater awareness on water management can be created by training/workshop for the water users.

Strengths/ advantages/ opportunities in the compiler’s or other key resource person’s view
The technology has supported the community members economically by increasing agricultural yields. Moreover, it contributes to reduce the costs of water during the summer season. How can they be sustained / enhanced? The land users should try to plant local and native trees and cultivate the crops which are adapted to the land.Community members should actively participate in maintenance activities.
Provides safe drinking water to the 43 households and the school at low cost. How can they be sustained / enhanced? Pipe scheme and cover of the reservoir, should be cleaned regularly. If any leakages occurs in the pipes or reservoir, they should be sealed. Water taps and water tanks should be properly maintained.
This technology has been applied in a low slope/latitude where the water flows with a very low speed and the application of other technologies was difficult. How can they be sustained / enhanced? Protect from sedimentation.
The hydraulic flange pump is produced locally. Procurement and installment of the pump contributes therefore to local economic growth and private sector development. How can they be sustained / enhanced? Link the company to the other potential buyers.

6.8 Weaknesses/ disadvantages/ risks of the Technology and ways of overcoming them

Weaknesses/ disadvantages/ risks in the land user’s view	How can they be overcome?
Social conflicts can occur during the distribution of water	The water in keeper/maintainer can be introduced by CDCs for the distribution of water.
Electricity cannot be produced by applying this technology. The slope and latitude of the location where the flange pump is installed is too small.

Weaknesses/ disadvantages/ risks in the compiler’s or other key resource person’s view	How can they be overcome?
It is difficult to apply the technology without any external and financial support.	Locally available materials should be used to reduce costs.
High level of technical knowledge is required for the establishment of the technology.	The technical knowledge should be transferred to the extension workers or local people to provide technical support in the future.
This technology needs regular maintenance and the reservoir has to be properly cleaned after heavy rainfalls.	The CDC should monitor maintenance activities by the caretaker as well as manage funds for maintenance costs.