Technologies

Non-inversion tillage for arable land [Romania]

technologies_2950 - Romania

Completeness: 84%

1. General information

1.2 Contact details of resource persons and institutions involved in the assessment and documentation of the Technology

Key resource person(s)

SLM specialist:
Name of project which facilitated the documentation/ evaluation of the Technology (if relevant)
Interactive Soil Quality assessment in Europe and China for Agricultural productivity and Environmental Resilience (EU-iSQAPER) {'additional_translations': {}, 'value': 846, 'label': 'Name of the institution(s) which facilitated the documentation/ evaluation of the Technology (if relevant)', 'text': 'National Research and Development Institute for So (National Research and Development Institute for So) - Romania', 'template': 'raw'}

1.3 Conditions regarding the use of data documented through WOCAT

The compiler and key resource person(s) accept the conditions regarding the use of data documented through WOCAT:

Yes

1.4 Declaration on sustainability of the described Technology

Is the Technology described here problematic with regard to land degradation, so that it cannot be declared a sustainable land management technology?

No

2. Description of the SLM Technology

2.1 Short description of the Technology

Definition of the Technology:

Soil tillage with chisel, non-inversion of furrow, 28 cm depth of tillage implemented.

2.2 Detailed description of the Technology

Description:

The technology is applied in Braila region and is located in north-eastern part of Romanian Plain. It has an agricultural area of 387,646 ha (of which 350,001 ha are arable land), and has specific geomorphologic, hydrological and climatic conditions which need to use ameliorative agricultural systems. Within Braila County are distinguished the following relief units: Calmatui Plain, part of the Braila Plain (51% from County area) and the Floodplains of Danube (Big Island of Braila), Siret, Buzau and Calmatui rivers (49% from County area).
Braila Plain is characterized by a specific micro-relief of Baragan type with large floodplains, poorly fragmented, with altitudes ranging between 20-25 m in the east part and 35-40 m to the west part, with soils mainly of chernozem type, formed on loess and loess deposits and which shows numerous small depression areas. Floodplains, areas adjacent to Danube, Siret, Buzau and Calmatui rivers are located at lower altitudes, ranging between 2-4 m and 13-15 m and are characterized by the presence of alluvial soils formed on river-limnic and alluvial deposits, with alternating of layers with different textures. According to United Nations Convention to Combat Desertification, Braila County is located in arid region with an average annual temperature of 10.9°C, long-term average annual precipitations (P) of 447 mm, potential evapotranspiration (ETP) of 705 mm (750-800 mm in dry years) and an average climatic water deficit of 258 mm (350-400 mm in dry years). The biophysical aridity index (P/ETP = 0.50-0.65) places the Braila region in area with moderate risk to desertification. Both intensive and extensive farming systems are practiced within Braila County. Intensive agriculture, characterized by high inputs and yield levels, is realized on large vegetal farms. On the other hand, extensive agriculture, with low input and yield levels, is practiced by farmers on small vegetal farms, and is so-called the semi-subsistent agriculture.
The chisel tillage technology is an agronomic measure, that is practiced on medium to large farms (from 50 ha to more than 1000 ha in size) within the North-Eastern part of the Romanian Plain. Over the past years some farmers have changed the farming system from conventional to reduced or conservation tillage. The most important characteristic of the technology is that the farmers do not invert the furrow during the main soil tillage operation. Also the soils are covered by plant residues (cereals straw and maize stalk chopped) on 30% of soil surface. In this way, in the long term, the soils remain protected from destructive factors, as e.g. erosive rainfalls, increases soil water retention capacity, and with this water availability and infiltration rate increase. The technology is applied on arable land with annual crops. The advantage of the tillage by chisel is that it leaves a higher surface roughness and is less destructive to soil aggregates.
The technology is applied on flat Fluvisols and Chernozems. The soil depth is very deep, the texture is in the medium class within the whole profile and the organic matter content is in medium range (1-3 %). The technology was firstly applied within a research project by the Agricultural Research and Development Station of Braila (ARDS Braila) and later was adopted by some land users within the area. The chisel equipment is usually bought by land users which have big vegetal farms. However, the equipment may be borrowed/leased by other land users from neighborhood.
In the land user's view, the strengths of the technology are as follows: positive effects on soil structure, biodiversity and soil water conservation, is a simple agricultural technique. In addition, the weaknesses of the technology reported by the land user might be: high investment costs for buying new agricultural machinery which can be met by renting from other farmers/agricultural contractors, new technology requires greater skill of the farmer which can be countered by further education and training, and sometimes soil surface neuniformity which can be prevented by additional tillage.

2.3 Photos of the Technology

2.5 Country/ region/ locations where the Technology has been applied and which are covered by this assessment

Country:

Romania

Region/ State/ Province:

Braila

Further specification of location:

Braila

Specify the spread of the Technology:
  • evenly spread over an area
If precise area is not known, indicate approximate area covered:
  • < 0.1 km2 (10 ha)
Comments:

Documentation of the technology is based on examination of field plots tilled by chisel smaller than 0.1 km2.

2.6 Date of implementation

If precise year is not known, indicate approximate date:
  • 10-50 years ago

2.7 Introduction of the Technology

Specify how the Technology was introduced:
  • during experiments/ research
Comments (type of project, etc.):

The technology was firstly implemented in the early 2000's and described by the Agricultural Research and Development Station of Braila (ARDS Braila) which is subordinated to the Academy of Agricultural and Forestry Sciences. The station ARDS Braila conducts research and development in the following subjects: irrigation systems, agricultural technologies and improvement and reclamation of salted soils.

3. Classification of the SLM Technology

3.1 Main purpose(s) of the Technology

  • reduce, prevent, restore land degradation
  • preserve/ improve biodiversity
  • adapt to climate change/ extremes and its impacts

3.2 Current land use type(s) where the Technology is applied

Cropland

Cropland

  • Annual cropping
Annual cropping - Specify crops:
  • cereals - maize
  • cereals - wheat (winter)
  • oilseed crops - sunflower, rapeseed, other
Number of growing seasons per year:
  • 1
Comments:

Main crops (cash and food crops): winter wheat, maize, sunflower

3.4 Water supply

Water supply for the land on which the Technology is applied:
  • mixed rainfed-irrigated

3.5 SLM group to which the Technology belongs

  • minimal soil disturbance

3.6 SLM measures comprising the Technology

agronomic measures

agronomic measures

  • A3: Soil surface treatment
A3: Differentiate tillage systems:

A 3.2: Reduced tillage (> 30% soil cover)

3.7 Main types of land degradation addressed by the Technology

physical soil deterioration

physical soil deterioration

  • Pu: loss of bio-productive function due to other activities
Comments:

Physical soil deterioration due to soil structure destruction.

3.8 Prevention, reduction, or restoration of land degradation

Specify the goal of the Technology with regard to land degradation:
  • reduce land degradation

4. Technical specifications, implementation activities, inputs, and costs

4.1 Technical drawing of the Technology

{'additional_translations': {}, 'content_type': 'image/jpeg', 'preview_image': '/media/70/7/70772f52-9c33-4478-89f1-393a5f673af4.jpg', 'key': 'Technical drawing', 'value': '/media/e8/7/e8739246-a21f-4da7-a4fb-1611630b2e18.jpg', 'template': 'raw'}
Technical specifications (related to technical drawing):

Soil tillage by chisel is done usually by two passes (one pass replace the ploughing and the second pass is done before plant sowing). The main advantage of this technology is that after plant sowing, around 30 % of the soil surface is covered by plant residues from the previous crop which were left on the soil surface. In this way, the water is preserved in soil and the infiltration rate is improved. Also the soil loosening may be done on the whole soil rooting depth.
Dimensions of the chisel implements are as follows: working width - 4 m; number of implements: 13; working depth: 15 - 40 cm; the implement slope angle: 27 degrees; the distance between implements: 30 cm.

4.2 General information regarding the calculation of inputs and costs

Specify how costs and inputs were calculated:
  • per Technology area
Indicate size and area unit:

1 hectare

Specify currency used for cost calculations:
  • USD
If relevant, indicate exchange rate from USD to local currency (e.g. 1 USD = 79.9 Brazilian Real): 1 USD =:

4.12

Indicate average wage cost of hired labour per day:

17.60 USD

4.4 Costs and inputs needed for establishment

Comments:

No initial investment needed, as for the machinery land users are working with agricultural contractors from the neighboring area or other land users that own the equipment.

4.5 Maintenance/ recurrent activities

Activity Timing/ frequency
1. non-inversion tillage by chisel annually

4.6 Costs and inputs needed for maintenance/ recurrent activities (per year)

Specify input Unit Quantity Costs per Unit Total costs per input % of costs borne by land users
Labour driving tractor with chisel implement person-days 0.5 17.6 8.8 100.0
Equipment chisel plough machinery machine-hours 3.0 20.2 60.6 100.0
Total costs for maintenance of the Technology 69.4
Total costs for maintenance of the Technology in USD 16.84

4.7 Most important factors affecting the costs

Describe the most determinate factors affecting the costs:

Costs are mostly affected by input costs (e.g. seeds, biocides). Costs do not include chisel equipment because the farmer rely on borrowing/leasing the equipment from other land users or agricultural contractors from the neighboring area.

5. Natural and human environment

5.1 Climate

Annual rainfall
  • < 250 mm
  • 251-500 mm
  • 501-750 mm
  • 751-1,000 mm
  • 1,001-1,500 mm
  • 1,501-2,000 mm
  • 2,001-3,000 mm
  • 3,001-4,000 mm
  • > 4,000 mm
Specify average annual rainfall (if known), in mm:

447.00

Agro-climatic zone
  • semi-arid

5.2 Topography

Slopes on average:
  • flat (0-2%)
  • gentle (3-5%)
  • moderate (6-10%)
  • rolling (11-15%)
  • hilly (16-30%)
  • steep (31-60%)
  • very steep (>60%)
Landforms:
  • plateau/plains
  • ridges
  • mountain slopes
  • hill slopes
  • footslopes
  • valley floors
Altitudinal zone:
  • 0-100 m a.s.l.
  • 101-500 m a.s.l.
  • 501-1,000 m a.s.l.
  • 1,001-1,500 m a.s.l.
  • 1,501-2,000 m a.s.l.
  • 2,001-2,500 m a.s.l.
  • 2,501-3,000 m a.s.l.
  • 3,001-4,000 m a.s.l.
  • > 4,000 m a.s.l.
Indicate if the Technology is specifically applied in:
  • not relevant

5.3 Soils

Soil depth on average:
  • very shallow (0-20 cm)
  • shallow (21-50 cm)
  • moderately deep (51-80 cm)
  • deep (81-120 cm)
  • very deep (> 120 cm)
Soil texture (topsoil):
  • medium (loamy, silty)
Soil texture (> 20 cm below surface):
  • medium (loamy, silty)
Topsoil organic matter:
  • medium (1-3%)

5.4 Water availability and quality

Ground water table:

5-50 m

Availability of surface water:

medium

Is water salinity a problem?

No

Is flooding of the area occurring?

No

5.5 Biodiversity

Species diversity:
  • medium
Habitat diversity:
  • medium

5.6 Characteristics of land users applying the Technology

Sedentary or nomadic:
  • Sedentary
Market orientation of production system:
  • mixed (subsistence/ commercial)
Off-farm income:
  • less than 10% of all income
Relative level of wealth:
  • average
Individuals or groups:
  • individual/ household
Level of mechanization:
  • mechanized/ motorized
Gender:
  • men
Age of land users:
  • middle-aged
Indicate other relevant characteristics of the land users:

The technology was firstly implemented by the Agricultural Research and Development Station of Braila.

5.7 Average area of land used by land users applying the Technology

  • < 0.5 ha
  • 0.5-1 ha
  • 1-2 ha
  • 2-5 ha
  • 5-15 ha
  • 15-50 ha
  • 50-100 ha
  • 100-500 ha
  • 500-1,000 ha
  • 1,000-10,000 ha
  • > 10,000 ha
Is this considered small-, medium- or large-scale (referring to local context)?
  • large-scale

5.8 Land ownership, land use rights, and water use rights

Land ownership:
  • state
  • individual, not titled
Land use rights:
  • leased

5.9 Access to services and infrastructure

health:
  • poor
  • moderate
  • good
education:
  • poor
  • moderate
  • good
technical assistance:
  • poor
  • moderate
  • good
employment (e.g. off-farm):
  • poor
  • moderate
  • good
markets:
  • poor
  • moderate
  • good
energy:
  • poor
  • moderate
  • good
roads and transport:
  • poor
  • moderate
  • good
drinking water and sanitation:
  • poor
  • moderate
  • good
financial services:
  • poor
  • moderate
  • good

6. Impacts and concluding statements

6.1 On-site impacts the Technology has shown

Socio-economic impacts

Production

land management

hindered
simplified
Comments/ specify:

The main advantage of the soil tillage by chisel is that the energy consumption is reduced, especially the fuel and labour are reduced.

Income and costs

expenses on agricultural inputs

increased
decreased
Comments/ specify:

The chisel equipments are expensive.

Socio-cultural impacts

SLM/ land degradation knowledge

reduced
improved
Comments/ specify:

Knowledge about this technology can be also obtained by farmers from the Agricultural Research and Development Station of Braila .

Ecological impacts

Soil

soil moisture

decreased
increased
Comments/ specify:

The plant residues from soil surface prevent the soil water loss by evaporation.

soil organic matter/ below ground C

decreased
increased
Comments/ specify:

Leaving the plant residues from the previous crop at the soil surface can improve the soil organic matter content.

Biodiversity: vegetation, animals

beneficial species

decreased
increased
Comments/ specify:

Leaving the plant residues from the previous crop at the soil surface has beneficial impact on soil fauna.

6.2 Off-site impacts the Technology has shown

wind transported sediments

increased
reduced

6.3 Exposure and sensitivity of the Technology to gradual climate change and climate-related extremes/ disasters (as perceived by land users)

Gradual climate change

Gradual climate change
Season increase or decrease How does the Technology cope with it?
annual temperature increase well
annual rainfall decrease well

Climate-related extremes (disasters)

Meteorological disasters
How does the Technology cope with it?
local rainstorm well
Climatological disasters
How does the Technology cope with it?
drought well

6.4 Cost-benefit analysis

How do the benefits compare with the establishment costs (from land users’ perspective)?
Short-term returns:

slightly positive

Long-term returns:

positive

How do the benefits compare with the maintenance/ recurrent costs (from land users' perspective)?
Short-term returns:

neutral/ balanced

Long-term returns:

slightly positive

6.5 Adoption of the Technology

  • 1-10%
Of all those who have adopted the Technology, how many did so spontaneously, i.e. without receiving any material incentives/ payments?
  • 91-100%
Comments:

One land user has implemented the technology voluntary.

6.6 Adaptation

Has the Technology been modified recently to adapt to changing conditions?

No

6.7 Strengths/ advantages/ opportunities of the Technology

Strengths/ advantages/ opportunities in the land user’s view
The technology has positive effects on soil structure and biodiversity.
The technology has positive effects on soil water conservation.
The technology is a simple agricultural technique.
Strengths/ advantages/ opportunities in the compiler’s or other key resource person’s view
The technology can be adapted and used under climate changes extremes.

6.8 Weaknesses/ disadvantages/ risks of the Technology and ways of overcoming them

Weaknesses/ disadvantages/ risks in the land user’s view How can they be overcome?
High investment costs for buying new agricultural machinery agricultural contractors
New technology requires greater skill of the farmer education, training
Sometimes soil surface neuniformity additional tillage
Weaknesses/ disadvantages/ risks in the compiler’s or other key resource person’s view How can they be overcome?
The farmer's mentality from local area towards conservation agriculture is constraining the adoption of the system by other farmers. continuous demonstration and dissemination about benefits of the technology

7. References and links

7.1 Methods/ sources of information

  • field visits, field surveys

2

  • interviews with land users

2

  • compilation from reports and other existing documentation

1

When were the data compiled (in the field)?

29/09/2017

7.2 References to available publications

Title, author, year, ISBN:

"Lucrarea conservativa a solului intre traditie si perspectiva in agricultura durabila" (Conservative tillage of soil between tradition and perspective in sustainable agriculture), Elisabeta Dumitru et. al., 2005, ISBN 973-86587-9-9.

Links and modules

Expand all Collapse all

Modules