Technologies

Thermo insulation of walls with use of foil to decrease burden on firewood use [Tadjikistan]

Гарминигохдории хонахо ба максади кам гардинаи истифодабарии хезум барои гарм кардани хона

technologies_3465 - Tadjikistan

État complet : 88%

1. Informations générales

1.2 Coordonnées des personnes-ressources et des institutions impliquées dans l'évaluation et la documentation de la Technologie

Personne(s)-ressource(s) clé(s)

Spécialiste GDT:

1.3 Conditions relatives à l'utilisation par WOCAT des données documentées

Le compilateur et la(les) personne(s) ressource(s) acceptent les conditions relatives à l'utilisation par WOCAT des données documentées:

Oui

1.4 Déclaration sur la durabilité de la Technologie décrite

Est-ce que la Technologie décrite ici pose problème par rapport à la dégradation des terres, de telle sorte qu'elle ne peut pas être déclarée comme étant une technologie de gestion durable des terres?

Non

1.5 Référence au(x) Questionnaires sur les Approches de GDT (documentées au moyen de WOCAT)

2. Description de la Technologie de GDT

2.1 Courte description de la Technologie

Définition de la Technologie:

This technology is designed for the high altitude mountains areas, where biomass and growing trees are limited, first because of the harsh climatic conditions and secondly because of the limited arable lands for growing biomass and forests. Thermo insulation is applied in order to keep warmth inside and save using wood and biomass.

2.2 Description détaillée de la Technologie

Description:

The technology is applied in the mountainous rural areas of Tajikistan, in Rasht, Khatlon and GBAO. In this mountain regions wood and biomass are usually limited because of the harsh climate, risky agricultural zone and limited arable land. In the first decade of the transition period after the collapse of the Soviet Union problems with electricity and therfore the demand for fuel and wood increased. This caused a lot of forest degradation, because people were cutting trees from government owned and community areas for their fuel needs and used animal manure for heating their houses and cooking food. The technology is specifically designed to use low cost materials so that rural households can afford it. The technology consists of material like foil and wood to build frames for some layers to keep in the heat. Depending on the altitude, which is linked to the climate condition, the number of layers is increased where the climate is cold. The layer in between contains air, which prevents outside and inside air to move out/in. The technology was intended for saving up to 30% fuel. The technology includes support of entrepreneurs to make foil available in the market and provides training for local masters and labourers in designing and constructing of the technology. The main benefit is to contribute to biomass savings and forest preservation through reduced use of wood for heating and cooking. Land users are in favour because through this technology they are using less wood and save forest. They also burn less manure and can use it as fertilizers for their land. The technology brings comfort for longer periods of time by keeping heat inside the room. In addition it contribute also to hygine and sanitation, as less fire making prevents smoke emission and therefore keeps the rooms clean. On first sight the technology seems expensive, becasue of the material costs but in the long run when the cost effectiveness is explained land users accepted it.

2.3 Photos de la Technologie

Remarques générales concernant les photos:

This technology is applied both on wall, floor and ceiling, where all parts is given more effect, then doing only on part of it.

2.5 Pays/ région/ lieux où la Technologie a été appliquée et qui sont couverts par cette évaluation

Pays:

Tadjikistan

Région/ Etat/ Province:

GBAO

Autres spécifications du lieu:

Khorog city

Spécifiez la diffusion de la Technologie:
  • appliquée en des points spécifiques ou concentrée sur une petite surface
Commentaires:

The technology is applied in buildings but have direct effect on preserving woodlands and crop lands.

2.6 Date de mise en œuvre de la Technologie

Si l'année précise est inconnue, indiquez la date approximative: :
  • il y a moins de 10 ans (récemment)

2.7 Introduction de la Technologie

Spécifiez comment la Technologie a été introduite: :
  • au cours d'expérimentations / de recherches
  • par le biais de projets/ d'interventions extérieures

3. Classification de la Technologie de GDT

3.1 Principal(aux) objectif(s) de la Technologie

  • réduire, prévenir, restaurer les terres dégradées
  • préserver l'écosystème
  • conserver/ améliorer la biodiversité
  • réduire les risques de catastrophes

3.2 Type(s) actuel(s) d'utilisation des terres, là où la Technologie est appliquée

Forêts/ bois

Forêts/ bois

  • Forêts (semi-)naturelles/ bois
  • Plantations d'arbres, boisements
Forêts (semi-)naturelles/ terres boisées: précisez le mode de gestion:
  • Coupes sélectives
Plantation d'arbres, afforestation: Précisez l'origine et la composition des espèces. :
  • Variétés mixtes
Produits et services:
  • Bois de chauffage
Implantations, infrastructures

Implantations, infrastructures

  • Habitats, buildings

3.3 Est-ce que l’utilisation des terres a changé en raison de la mise en œuvre de la Technologie ?

Commentaires:

As a result of applying the technology in big numbers it is contributing to forest preservation and improving crop land conditions.

3.4 Approvisionnement en eau

Approvisionnement en eau des terres sur lesquelles est appliquée la Technologie:
  • mixte: pluvial-irrigué
Commentaires:

both forest, which are mainly growing along the river flowing from the mountians and the open space irrigation is used in this case. In addition an agroforestry system is traditionally common in the technology area, where both tree are grown and the land is cultivated.


Number of growing seasons per year:

1

Specify:

there is only one season for growing, as the winter is very long and the vegetative period is only 5-6 months. traditonally an agro-foresty system is practiced in this area, where both tree are grown and crop land is cultivated.

3.5 Groupe de GDT auquel appartient la Technologie

  • gestion des forêts naturelles et semi-naturelles
  • gestion des plantations forestières
  • agroforesterie

3.6 Mesures de GDT constituant la Technologie

structures physiques

structures physiques

  • S10: Mesures d'économie d'énergie
modes de gestion

modes de gestion

  • M1: Changement du type d’utilisation des terres
  • M2: Changement du niveau de gestion / d'intensification

3.7 Principaux types de dégradation des terres traités par la Technologie

érosion éolienne des sols

érosion éolienne des sols

  • Et: perte de la couche superficielle des sols (couche arable)
dégradation physique des sols

dégradation physique des sols

  • Pc: compaction
Commentaires:

when the technology is widely applied, this will prevents tree cutting and forest rehabilitation, which also prevent soil from overgrazing and compaction.

3.8 Prévention, réduction de la dégradation ou réhabilitation des terres dégradées

Spécifiez l'objectif de la Technologie au regard de la dégradation des terres:
  • prévenir la dégradation des terres
Commentaires:

once the technology is widely introduced it will prevents tree cutting, which also prevents soil degradation.

4. Spécifications techniques, activités, intrants et coûts de mise en œuvre

4.1 Dessin technique de la Technologie

Spécifications techniques (associées au dessin technique):

A wooden frames is installed on the wall to cover the whole area. Foil will be stretched and will be fixed on the wooden frame on the wall. Based on the need number of layers is selected, which depend on the min/max outside temperature. If required according to the climate and wether of the area and based on altitude another frame from wood will be constructed on the foil and then again another layer of foil will be fixed. The scheme show the frame on the wall with thermo-insulation materials attached to it. The distance between two part of the foil should be an average 2-3sm.

Auteur:

Khujamyor Khumorikov

Date:

23/03/2011

4.2 Informations générales sur le calcul des intrants et des coûts

Spécifiez la manière dont les coûts et les intrants ont été calculés:
  • par superficie de la Technologie
Indiquez la taille et l'unité de surface:

1 square meter cost 75

Indiquez la monnaie utilisée pour le calcul des coûts:
  • dollars américains
Indiquez le coût salarial moyen de la main d'œuvre par jour:

per sequare meter around 2.5 USD

4.3 Activités de mise en place/ d'établissement

Activité Calendrier des activités (saisonnier)
1. Installing of the wood frame 1 day
2. attaching/fixing the foil with nail on the wooden frame (add frame and foil layer per need) 1 day
3. Cover the structure with clay (mixture of soil and water) as construction material 2-4 days

4.4 Coûts et intrants nécessaires à la mise en place

Spécifiez les intrants Unité Quantité Coûts par unité Coût total par intrant % du coût supporté par les exploitants des terres
Main d'œuvre Local master person 1,0 2,0 2,0 30,0
Matériaux de construction wood pe sq meter 0,5 100,0 50,0
Matériaux de construction nail piece 20,0 0,1 2,0
Matériaux de construction foil squire meter 1,0 1,0 1,0
Coût total de mise en place de la Technologie 55,0
Coût total de mise en place de la Technologie en dollars américains (USD) 55,0

4.6 Coûts et intrants nécessaires aux activités d'entretien/ récurrentes (par an)

Si le coût n'est pas pris en charge à 100% par l'exploitant des terres, indiquez qui a financé le coût restant:

for the demonstration sites 100% of the cost is covered by the project implemented by MSDSP

4.7 Facteurs les plus importants affectant les coûts

Décrivez les facteurs les plus importants affectant les coûts :

the cost for the constuction materials in the beginning, because as new technology was introduced foil, as the main product for the technology was difficult to find in the market, which is now commonly sold

5. Environnement naturel et humain

5.1 Climat

Précipitations annuelles
  • < 250 mm
  • 251-500 mm
  • 501-750 mm
  • 751-1000 mm
  • 1001-1500 mm
  • 1501-2000 mm
  • 2001-3000 mm
  • 3001-4000 mm
  • > 4000 mm
Spécifications/ commentaires sur les précipitations:

The technology is applied in high mountain regions of Tajikistan, which are arid and semi-arid zones where some area have less than 100 mm rainfall and in some could be 200-300

Indiquez le nom de la station météorologique de référence considérée:

Regional meteorological station GBAO

Zone agro-climatique
  • semi-aride
  • aride

the whole area of Tajikistan, where the technology is applied is classified as arid or semi-arid agro-climatic zone

5.2 Topographie

Pentes moyennes:
  • plat (0-2 %)
  • faible (3-5%)
  • modéré (6-10%)
  • onduleux (11-15%)
  • vallonné (16-30%)
  • raide (31-60%)
  • très raide (>60%)
Reliefs:
  • plateaux/ plaines
  • crêtes
  • flancs/ pentes de montagne
  • flancs/ pentes de colline
  • piémonts/ glacis (bas de pente)
  • fonds de vallée/bas-fonds
Zones altitudinales:
  • 0-100 m
  • 101-500 m
  • 501-1000 m
  • 1001-1500 m
  • 1501-2000 m
  • 2001-2500 m
  • 2501-3000 m
  • 3001-4000 m
  • > 4000 m
Indiquez si la Technologie est spécifiquement appliquée dans des:
  • non pertinent

5.3 Sols

Profondeur moyenne du sol:
  • très superficiel (0-20 cm)
  • superficiel (21-50 cm)
  • modérément profond (51-80 cm)
  • profond (81-120 cm)
  • très profond (>120 cm)
Texture du sol (de la couche arable):
  • grossier/ léger (sablonneux)
Texture du sol (> 20 cm sous la surface):
  • fin/ lourd (argile)
Matière organique de la couche arable:
  • abondant (>3%)
Si disponible, joignez une description complète du sol ou précisez les informations disponibles, par ex., type de sol, pH/ acidité du sol, capacité d'échange cationique, azote, salinité, etc.

the area is mountain specified as risky agro-climatic zone for agriculture.

5.4 Disponibilité et qualité de l'eau

Profondeur estimée de l’eau dans le sol:

5-50 m

Disponibilité de l’eau de surface:

excès

Qualité de l’eau (non traitée):

eau potable

La salinité de l'eau est-elle un problème? :

Non

La zone est-elle inondée?

Oui

Régularité:

épisodiquement

Commentaires et précisions supplémentaires sur la qualité et la quantité d'eau:

very rare case, but becoming more frequently in the last years, when there is heavy rainy season are becoming more common.

5.5 Biodiversité

Diversité des espèces:
  • élevé
Diversité des habitats:
  • moyenne

5.6 Caractéristiques des exploitants des terres appliquant la Technologie

Sédentaire ou nomade:
  • Semi-nomade
Orientation du système de production:
  • subsistance (auto-approvisionnement)
Revenus hors exploitation:
  • moins de 10% de tous les revenus
Niveau relatif de richesse:
  • pauvre
Individus ou groupes:
  • groupe/ communauté
Niveau de mécanisation:
  • travail manuel
Genre:
  • femmes
  • hommes
Age des exploitants des terres:
  • personnes d'âge moyen
  • personnes âgées

5.7 Superficie moyenne des terres utilisées par les exploitants des terres appliquant la Technologie

  • < 0,5 ha
  • 0,5-1 ha
  • 1-2 ha
  • 2-5 ha
  • 5-15 ha
  • 15-50 ha
  • 50-100 ha
  • 100-500 ha
  • 500-1 000 ha
  • 1 000-10 000 ha
  • > 10 000 ha
Cette superficie est-elle considérée comme de petite, moyenne ou grande dimension (en se référant au contexte local)?
  • petite dimension

5.8 Propriété foncière, droits d’utilisation des terres et de l'eau

Propriété foncière:
  • état
Droits d’utilisation des terres:
  • individuel
Droits d’utilisation de l’eau:
  • accès libre (non organisé)

5.9 Accès aux services et aux infrastructures

santé:
  • pauvre
  • modéré
  • bonne
emploi (par ex. hors exploitation):
  • pauvre
  • modéré
  • bonne
énergie:
  • pauvre
  • modéré
  • bonne
routes et transports:
  • pauvre
  • modéré
  • bonne
services financiers:
  • pauvre
  • modéré
  • bonne

6. Impacts et conclusions

6.1 Impacts sur site que la Technologie a montrés

Impacts socio-économiques

Revenus et coûts

diversité des sources de revenus

en baisse
en augmentation
Commentaires/ spécifiez:

After applying the technology it contributed to 30% of firewood saving, which cost money for the households and community before.

charge de travail

en augmentation
en baisse
Commentaires/ spécifiez:

less workload applied, one the house is kept for longer time heated and additional effort is not required to make fire

Impacts écologiques

Sols

couverture du sol

réduit
amélioré
Commentaires/ spécifiez:

in case the technology is used widely, which prevents extensive forest use to provide soil cover with vegetation

Biodiversité: végétale, animale

diversité des habitats

en baisse
en augmentation
Commentaires/ spécifiez:

contributes to saving local trees, which are very few growing in the arid areas

Réduction des risques de catastrophe et des risques climatiques

glissements de terrains/coulées de débris

en augmentation
en baisse
Commentaires/ spécifiez:

after not cutting the trees and reforestation of degraded area, especially in the slope area contributed to land slide prevention

6.2 Impacts hors site que la Technologie a montrés

dommages sur les infrastructures publiques/ privées

en augmentation
réduit
Commentaires/ spécifiez:

one contributing to disaster prevention, like landslide and mudflow also prevents damage to houses and public infrastructure

6.3 Exposition et sensibilité de la Technologie aux changements progressifs et aux évènements extrêmes/catastrophes liés au climat (telles que perçues par les exploitants des terres)

Changements climatiques progressifs

Changements climatiques progressifs
Saison Augmentation ou diminution Comment la Technologie fait-elle face à cela?
températures saisonnières hiver décroît modérément

6.4 Analyse coûts-bénéfices

Quels sont les bénéfices comparativement aux coûts de mise en place (du point de vue des exploitants des terres)?
Rentabilité à court terme:

légèrement négative

Rentabilité à long terme:

positive

Quels sont les bénéfices comparativement aux coûts d'entretien récurrents (du point de vue des exploitants des terres)?
Rentabilité à court terme:

légèrement positive

Rentabilité à long terme:

neutre / équilibrée

6.5 Adoption de la Technologie

  • 11-50%
De tous ceux qui ont adopté la Technologie, combien d'entre eux l'ont fait spontanément, à savoir sans recevoir aucune incitation matérielle, ou aucune rémunération? :
  • 11-50%

6.6 Adaptation

La Technologie a-t-elle été récemment modifiée pour s'adapter à l'évolution des conditions?

Non

6.7 Points forts/ avantages/ possibilités de la Technologie

Points forts/ avantages/ possibilités du point de vue de l'exploitant des terres
One time investment contributes to long term effects in saving forest and biodiversity, provides comfort without additional cost using for collection/buying firewood.
Points forts/ avantages/ possibilités du point de vue du compilateur ou d'une autre personne ressource clé
The technology contributes to habitat improvement at all, besides conservation of natural resources it also has social effects in terms of reduced smoke emissions as a result of less firewood making, comfortable condition during harsh winter weather.

6.8 Faiblesses/ inconvénients/ risques de la Technologie et moyens de les surmonter

Faiblesses/ inconvénients/ risques du point de vue de l’exploitant des terres Comment peuvent-ils être surmontés?
In the short term a big investment is required. Funding mechanisms should be improved to provide access for farmers/rural population to invest in such technology. Some of the incentive mechanisms should be worked out for replicating the mechanism.
Specialized master skills are required to implement the technology. More capacity building for existing local farmers should be organized at the local level for long term sustainability.
Faiblesses/ inconvénients/ risques du point de vue du compilateur ou d'une autre personne ressource clé Comment peuvent-ils être surmontés?
By implementing one or two demonstrations at the household level the effect for the purpose of replication and dissemination is very low. Demonstrations should be applied in public places like school or hospitals so everybody can have access and see the impact.

7. Références et liens

7.1 Méthodes/ sources d'information

  • interviews/ entretiens avec les spécialistes/ experts de GDT

2

  • compilation à partir de rapports et d'autres documents existants

1

Quand les données ont-elles été compilées (sur le terrain)?

31/08/2015

7.2 Références des publications disponibles

Titre, auteur, année, ISBN:

Wall Insulation Techniques for Buildings in High Mountain Areas

Disponible à partir d'où? Coût?

from SLM specialist, free of cost

Modules