1.2 Contact details of resource persons and institutions involved in the assessment and documentation of the Technology

Name of project which facilitated the documentation/ evaluation of the Technology (if relevant)

Book project: where the land is greener - Case Studies and Analysis of Soil and Water Conservation Initiatives Worldwide (where the land is greener)

Name of project which facilitated the documentation/ evaluation of the Technology (if relevant)

Book project: SLM in Practice - Guidelines and Best Practices for Sub-Saharan Africa (SLM in Practice)

1.3 Conditions regarding the use of data documented through WOCAT

The compiler and key resource person(s) accept the conditions regarding the use of data documented through WOCAT:

Yes

1.4 Declaration on sustainability of the described Technology

Is the Technology described here problematic with regard to land degradation, so that it cannot be declared a sustainable land management technology?

No

1.5 Reference to Questionnaire(s) on SLM Approaches (documented using WOCAT)

2.1 Short description of the Technology

Definition of the Technology:

Ripping of soil using oxen-drawn implements, to improve water storage capacity and cropland productivity on small-scale farms.

2.2 Detailed description of the Technology

Description:

Laikipia District in Kenya is characterised by a semi-arid climate, high altitude and rolling terrain. Most of the soil and water loss occurs during a few heavy storms at the beginning of each growing season. More than 90% of families have under two hectares of land, and few have alternative sources of income.
The form of conservation agriculture described in this case study involves the use of ox-drawn ploughs, modified to rip the soil. Ripping is performed in one pass, to a depth of 10 cm, after harvest. Spacing between the rip lines is 30 cm - in the case of wheat. Deep ripping (subsoiling) with the same implement is done, when necessary, to break a plough pan and reaches depths of up to 30 cm. An adaptation to the ordinary plough beam (the common mouldboard ‘Victory’ plough) makes adjustment to different depths possible and turns it into a ripper for surface and deeper ripping.

The aim of ripping is to increase water infiltration and reduce runoff. In contrast to conventional tillage, the soil is not inverted, thus leaving a certain amount of crop residue on the surface. As a result, the soil is less exposed and not so vulnerable to the impact of splash and sheet erosion, and water loss through evaporation and runoff. In addition, there are savings in terms of energy used for cultivation. In well-ripped fields, rainfall from storms at the onset of the growing season is stored within the rooting zone, and is therefore available to the crop during subsequent drought spells. Ripping the soil during the dry season combined with a mulch cover reduces germination of weeds, leaving fields ready for planting. In case of stubborn weeds, pre-emergence herbicides are used for control. Yields from small-scale conservation tillage can be more than 60% higher than under conventional ploughing. An additional important benefit is that crops mature sooner in conservation agriculture, because they can be planted earlier: under inversion tillage the farmer has to wait for the soil to become moist before ploughing. Earlier crop maturity means access to markets when prices are still high.

There are various supportive technologies in use which can improve the effectiveness of the ripping. These include: (1) use of compost/manure to improve soil structure for better water storage; (2) use of a cover crop (eg Mucuna pruriens) planted at the end of the season to prevent erosion, control weeds and improve soil quality; (3) agroforestry: principally Grevillea robusta planted on the field boundaries (see also ‘Grevillea agroforestry system’).

2.3 Photos of the Technology

2.5 Country/ region/ locations where the Technology has been applied and which are covered by this assessment

2.6 Date of implementation

If precise year is not known, indicate approximate date:

• less than 10 years ago (recently)

2.7 Introduction of the Technology

Specify how the Technology was introduced:

• through projects/ external interventions

Comments (type of project, etc.):

RELMA (Regional Land Management Unit) development in East and Central Africa

3.1 Main purpose(s) of the Technology

• improve production
• reduce, prevent, restore land degradation

3.2 Current land use type(s) where the Technology is applied

Land use mixed within the same land unit:

No

Comments:

Trees/ shrubs species: Grevillea robusta

Major land use problems (compiler’s opinion): Loss of rainwater through runoff and direct evaporation from soil surface, runoff causing surface erosion, fertility decline due to erosion and nutrient mining
Major land use problems (land users’ perception): Declining rainfall leading to reduced or no yields. The need to add fertiliser to achieve good yields.

Type of cropping system and major crops comments: Monocrop wheat (March-August) followed by beans/potatoes (Oct-Dec). Maize has a longer growivng season and usually harvested in November but will be intercropped with beans and potatoes (see annex T3). Occasional herbicide usage eg in wheat, 2,4-D is used to control weeds prior to canopy cover. Wheat is mixed with fertiliser prior to planting. Fertiliser placement for all crops is adjacent to seed.

3.4 Water supply

Water supply for the land on which the Technology is applied:

• mixed rainfed-irrigated

3.5 SLM group to which the Technology belongs

• improved ground/ vegetation cover
• minimal soil disturbance

3.6 SLM measures comprising the Technology

Comments:

Specification of other agronomic measures: conserv. tillage (ripping); manure, cover crop (supp.)
Specification of other vegetative measures: Grevillea robusta
Type of agronomic measures: mixed cropping / intercropping, mulching, minimum tillage, contour tillage, breaking compacted subsoil

3.7 Main types of land degradation addressed by the Technology

Comments:

Main causes of degradation: Heavy / extreme rainfall (intensity/amounts) (low rainfall), education, access to knowledge and support services (Lack of knowledge of the technology and low levels of general education)

Secondary causes of degradation: other human induced causes (specify) (agricultural causes - poor varieties eg farmers started growing Kwale wheat, a drought-escaping crop (DEC) that also provides good yields)

3.8 Prevention, reduction, or restoration of land degradation

Specify the goal of the Technology with regard to land degradation:

• reduce land degradation

4.1 Technical drawing of the Technology

4.2 General information regarding the calculation of inputs and costs

other/ national currency (specify):

Kenya shillings

4.5 Maintenance/ recurrent activities

	Activity	Timing/ frequency
1.	Spreading of crop residue as mulch: up to 3 t/ha	Dry season / Before planting
2.	Spreading of crop residue as mulch: up to 3 t/ha	Dry season / Before planting
3.	Spreading of crop residue as mulch: up to 3 t/ha	Dry season / Before planting
4.	Spreading of crop residue as mulch: up to 3 t/ha	Dry season / Before planting
5.	Ripping of soil

4.6 Costs and inputs needed for maintenance/ recurrent activities (per year)

	Specify input	Unit	Quantity	Costs per Unit	Total costs per input	% of costs borne by land users
Labour	Labour	ha	1.0	25.0	25.0	100.0
Plant material	Seeds for wheat	kg	1.0	25.0	25.0	100.0
Fertilizers and biocides	Fertilizer	ha	1.0	8.0	8.0	100.0
Fertilizers and biocides	Compost / manure	ha	1.0	35.0	35.0	100.0
Total costs for maintenance of the Technology					93.0
Total costs for maintenance of the Technology in USD					93.0

Comments:

Machinery/ tools: Pair of oxen and 1 Rampstad plough unit. Note the cost for animal traction includes operator labour. Cost of seeds is for wheat

Cost calculated charges for hiring equipment, draught animals and operator: these are all rolled up into the ‘cost
of labour’ at US$ 25/ha. Conventional tillage costs US$ 37.5/ha compared with US$ 25/ha for conservation tillage operations: other costs remain more or less the same.

4.7 Most important factors affecting the costs

Describe the most determinate factors affecting the costs:

Land preparation cost - equipment, draught animals, operator.

5.1 Climate

5.2 Topography

5.3 Soils

5.6 Characteristics of land users applying the Technology

Indicate other relevant characteristics of the land users:

Population density: 100-200 persons/km2
Annual population growth: > 4%

5% of the land users are very rich and own 15% of the land.
5% of the land users are rich and own 10% of the land.
15% of the land users are average wealthy and own 20% of the land.
70% of the land users are poor and own 50% of the land.
5% of the land users are poor and own 5% of the land.

Off-farm income specification: many small-scale farmers work part time as casual labourers on large-scale horticultural farms

5.7 Average area of land used by land users applying the Technology

5.8 Land ownership, land use rights, and water use rights

Land ownership:

• individual, titled

Land use rights:

• leased
• individual

6.1 On-site impacts the Technology has shown

Socio-economic impacts

Production

Income and costs

Socio-cultural impacts

Ecological impacts

Water cycle/ runoff

Soil

6.2 Off-site impacts the Technology has shown

6.4 Cost-benefit analysis

How do the benefits compare with the maintenance/ recurrent costs (from land users' perspective)?

Comments:

L’investissement initial peut être élevé (achat d’équipement neuf). Les coûts diminuent sur le long terme et les bénéfices augmentent

6.5 Adoption of the Technology

Comments:

100% of land user families have adopted the Technology without any external material support
200 land user families have adopted the Technology without any external material support
Comments on spontaneous adoption: estimates

There is a little trend towards spontaneous adoption of the Technology
Comments on adoption trend: - Some innovative farmers noticed the practice on large scale farms and decided to test it for themselves. Furthermore, enterprising individuals saw an opportunity to contract their services (oxen, equipment) to neighbouring farms.

6.7 Strengths/ advantages/ opportunities of the Technology

Strengths/ advantages/ opportunities in the compiler’s or other key resource person’s view
Better soil and water management resulting in (1) reduction of runoff (heavy storm runoff reduced from 75% to 50% and medium storm runoff from 50% to 25%; no runoff from small storms); (2) reduction of evaporation loss (without crop residues 40–60% of the rainwater is lost through direct evaporation from the exposed soil surface)1; (3) improved soil moisture (25-60% with better results for high rainfall and heavy storms)2; (4) reduced amount of soil inverted: impact is energy saving and organic matter conservation; (5) earlier crop maturity (16% reduction in crop maturity period for wheat: reduced risk of suffering from drought and able to get crops to market early); (6) improved crop production and yield (from 1.5 to 2.7 t/ha/year of wheat)3 1 Mutunga, 1995; 2 Liniger & Thomas, 1998; 3 Ngigi, 2003 How can they be sustained / enhanced? Access to more appropriate varieties, diversify cropping, better weather predictions to enable farmer to better spread risk.
Large potential for increased income (yield surplus sold)
Sustainable and stable crop production
Intensification of production with reduced inputs (a ‘win-win’ situation): mitigates the problem of declining plot sizes.
Intensification de la production avec des intrants réduits (win-win situation)

6.8 Weaknesses/ disadvantages/ risks of the Technology and ways of overcoming them

Weaknesses/ disadvantages/ risks in the land user’s view	How can they be overcome?
Coûts d’entretien élevés pour le matériel et les animaux	possibilité de prêts (micro financements); création de groupes d’entraide de paysans pour répartir les coûts

Weaknesses/ disadvantages/ risks in the compiler’s or other key resource person’s view	How can they be overcome?
No clear advantage in extreme climatic conditions	Make farmers aware about this so they do not become discouraged.
As crop residues are often used for feeding animals, there is a conflict between using residues as mulch and as livestock fodder	Greater yields mean a higher income, and savings can be put aside to buy fodder; through water conservation there is more residue production also.
Equipment and animal maintenance cost	Possible loan scheme (microfinance option); build farmer self-help-groups to share costs.
In areas with stubborn weeds pre-emergence herbicides application is necessary	Mulch application reduces negative effects of weeds.
Conflit autour de l’utilisation des résidus: paillage ou nourriture pour le bétail	de meilleurs rendements peuvent permettre d’acheter du fourrage : plus de biomasse / matériau de paillage

7.1 Methods/ sources of information

7.2 References to available publications

Title, author, year, ISBN:

Kihara FI. 1999. An investigation into the soil loss problem in the Upper Ewaso Ng’iro basin, Kenya. MSc. Thesis. University of Nairobi, Kenya

Title, author, year, ISBN:

Mutunga C.N. 1995. The influence of vegetation cover on runoff and soil loss – a study in Mukogodo, Laikipia district Kenya. MSc Thesis, University of Nairobi, Kenya

Title, author, year, ISBN:

Ngigi S.N. 2003. Rainwater Harvesting for improved land productivity in the Greater Horn of Africa. Kenya Rainwater Association, Nairobi

Title, author, year, ISBN:

Liniger HP. and D.B. Thomas. 1998. GRASS – Ground Cover for Restoration of Arid and Semi-arid Soils.

Available from where? Costs?

Advances in GeoEcology 31, 1167–1178. Catena Verlag, Reiskirchen