បច្ចេកទេស

Plastic film technology [ប្រទេសនេប៉ាល់]

  • ការបង្កើត៖
  • បច្ចុប្បន្នភាព
  • អ្នកចងក្រង៖
  • អ្នកកែសម្រួល៖
  • អ្នកត្រួតពិនិត្យច្រើនទៀត៖ ,

Plastic proyog gari kheti garne prabidhi (Main Contributor: Samden Sherpa, ICIMOD)

technologies_1687 - ប្រទេសនេប៉ាល់

ពិនិត្យមើលគ្រប់ផ្នែក

ពង្រីកមើលទាំងអស់ បង្រួមទាំងអស់
ភាពពេញលេញ៖ 76%

1. ព័ត៌មានទូទៅ

1.2 ព័ត៌មានលម្អិតពីបុគ្គលសំខាន់ៗ និងស្ថាប័នដែលចូលរួមក្នុងការវាយតម្លៃ និងចងក្រងឯកសារនៃបច្ចេកទេស

បុគ្គលសំខាន់ម្នាក់ (ច្រើននាក់)

អ្នកជំនាញឯកទេស SLM:
អ្នកជំនាញឯកទេស SLM:

Sherpa Samden Lama

ICIMOD

ប្រទេសនេប៉ាល់

ឈ្មោះអង្គភាពមួយ (ច្រើន) ដែលបានចងក្រងឯកសារ/ វាយតម្លៃបច្ចេកទេស (បើទាក់ទង)
ICIMOD International Centre for Integrated Mountain Development (ICIMOD) - ប្រទេសនេប៉ាល់

1.3 លក្ខខណ្ឌទាក់ទងទៅនឹងការប្រើប្រាស់ទិន្នន័យដែលបានចងក្រងតាមរយៈ វ៉ូខេត

អ្នកចងក្រង និង(បុគ្គលសំខាន់ៗ)យល់ព្រមទទួលយកនូវលក្ខខណ្ឌនានាទាក់ទងទៅនឹងការប្រើប្រាស់ទិន្នន័យដែលបានចងក្រងតាមរយៈវ៉ូខេត:

បាទ/ចា៎

2. ការពណ៌នាពីបច្ចេកទេស SLM

2.1 ការពណ៌នាដោយសង្ខេបពីបច្ចេកទេស

និយមន័យបច្ចេកទេស:

Plastic film technology, sometimes called plastic mulching, is an important breakthrough that can transform traditional agriculture into modern agriculture by helping to circumvent many of the limitations of temperature and moisture. Plastic film is used to cover the surface of the soil in order to increase the temperature, to retain moisture, and to promote the germination of seeds.

2.2 ការពណ៌នាលម្អិតពីបច្ចេកទេស

ការពណ៌នា:

Agricultural production by traditional methods is constrained by extremes in temperature and by extremes in the availability of water; freezing temperatures as well as droughts and waterlogging have long daunted farmers. When plastic film is used on the soil, the solar energy absorbed by the soil during the day is retained at night since the plastic film prevents water from evaporating. Higher night time temperatures and higher levels of moisture in the ground promote active micro-organisms, which diminish the need for fertilizer and improve the physical properties of the soil.

Purpose of the Technology: Plastic film can be used in one of two ways. In the first method, the plastic film is spread on ridges of soil, the plastic is perforated at regular intervals, and the seedlings are planted through these openings. In the other method, seeds are planted on the ridges as in the traditional method, and when the seedlings have grown to a reasonable size, the ridge is covered by a plastic film and holes are cut at the position of the seedlings to allow them to pass through the film. Depending on the condition of the film after the crops are harvested, the covered ridges can be used to grow another crop.

Establishment / maintenance activities and inputs: Experiments at ICIMOD show that the use of plastic film can, on average, double the crop yield as compared to traditional methods. Previous studies by Lu Rongsen (1994) showed that the plastic film method can increase chilli production by 74%, tomato production by 52%, and the production of garden peas by 31%.

2.3 ​រូបភាពនៃបច្ចេកទេស

2.5 ប្រទេស/តំបន់/ទីតាំងកន្លែង ដែលបច្ចេកទេសត្រូវបានអនុវត្ត និងបានគ្រប់ដណ្តប់ដោយការវាយតម្លៃនេះ

ប្រទេស:

ប្រទេសនេប៉ាល់

បញ្ជាក់បន្ថែមពីលក្ខណៈនៃទីតាំង:

Lalitpur District

បញ្ជាក់ពីការសាយភាយនៃបច្ចេកទេស:
  • ត្រូវបានផ្សព្វផ្សាយត្រឹមតំបន់មួយ
មតិយោបល់:

It was done in demonstration plote

2.7 ការណែនាំពីបច្ចេកទេស

សូមបញ្ជាក់តើបច្ចេកទេសត្រូវបានណែនាំឱ្យអនុវត្តដោយរបៀបណា:
  • ពេលកំពុងពិសោធន៍

3. ចំណាត់ថ្នាក់នៃបច្ចេកទេស SLM

3.1 គោលបំណងចម្បង (១​ ឬច្រើន)​ នៃបច្ចេកទេសនេះ

  • ធ្វើឱ្យប្រសើរឡើងនូវផលិតកម្ម

3.2 ប្រភេទដីប្រើប្រាស់មួយប្រភេទ (ច្រើនប្រភេទ) ដែលបានអនុវត្តបច្ចេកទេស

ដីដាំដំណាំ

ដីដាំដំណាំ

  • ដំណាំប្រចាំឆ្នាំ
ចំនួនសារដែលដាំដំណាំក្នុងមួយឆ្នាំ:
  • 2
ដីព្រៃ/ដីដាំដើមឈើ

ដីព្រៃ/ដីដាំដើមឈើ

ផលិតផល និងសេវាកម្ម:
  • អុស
  • ផលិតផលព្រៃផ្សេងៗ
មតិយោបល់:

Major land use problems (compiler’s opinion): Farmers have traditionally used mulching to retain moisture in the soil and to help plants withstand ground frost. Mulching is useful but has many limitations. Recently, plastic film technology has been successfully introduced to help retain moisture in the soil and to promote seed germination. Since moisture is retained, the temperature of the soil does not drop as low as it would otherwise; this accelerates the growth and the development of both the roots and the whole plant, resulting in good crops and high yields.

Forest products and services: fuelwood

Other forest products and services: Fodder

Constraints of Scrubland

3.5 ក្រុម SLM ដែលបច្ចេកទេសស្ថិតនៅក្នុង

  • ធ្វើឱ្យប្រសើរឡើងគម្របដី/ ដំណាំគម្របដី

3.6 វិធានការ SLM ដែលបញ្ចូលនូវបច្ចេកទេស

វិធានការគ្រប់គ្រង

វិធានការគ្រប់គ្រង

  • M7: ផ្សេងៗ

3.7 កំណត់ប្រភេទនៃការធ្លាក់ចុះគុណភាពដីសំខាន់ៗដែលបច្ចេកទេសនេះបានដោះស្រាយ

ការបាត់បង់ទឹក

ការបាត់បង់ទឹក

  • Ha: ការថយចុះសំណើមដី

3.8 ការពារ កាត់បន្ថយ ឬស្តារឡើងវិញនៃការធ្លាក់ចុះគុណភាពដី

បញ្ជាក់ពីគោលដៅរបស់បច្ចេកទេស ដែលផ្តោតទៅការធ្លាក់ចុះគុណភាពដី:
  • ការកាត់បន្ថយការធ្លាក់ចុះគុណភាពដី

4. បច្ចេកទេសជាក់លាក់ សកម្មភាពអនុវត្ត ធាតុចូល និងថ្លៃដើម

4.1 គំនូសបច្ចេកទេសនៃបច្ចេកទេសនេះ

លក្ខណៈពិសេសនៃបច្ចេកទេស (ទាក់ទងនឺងគំនូរបច្ចេកទេស):

The diagram shows a cross-section of a ridge planted using plastic film technology. The plants grow through holes punched in the plastic. The plastic helps to retain moisture in the soil and, in so doing, also helps to increase the soil temperature. Weeds trapped below the plastic are inhibited from interfering with the crop.
The ridges (or beds) are typically 20 m long, 1 m wide and spaced 1 m apart (for access); they are usually 10–20 cm high. The distances shown in the diagram are averages for crops such as chillies where the row-to-row distance is 50–70 cm and the plant-to plant distance is 40–50 cm. These distances vary according to the crop.

Technical knowledge required for land users: moderate

Main technical functions: Increase the temperature of the soil and promote seed germination and emergence, Retain soil moisture and reduce soil erosion

Secondary technical functions: Accelerates the growth and development of roots and plants in areas where the temperature is low dur, Hastens maturation of crops and increase yield and promote good quality crop

Change of land use practices / intensity level

ឈ្មោះអ្នកនិពន្ធ:

AK Thaku

4.2 ព័ត៌មានទូទៅដែលពាក់ព័ន្ធនឹងការគណនាធាតុចូល និងថ្លៃដើម

កំណត់របៀបនៃការគណនាថ្លៃដើម និងធាតុចូល:
  • ក្នុងតំបន់អនុវត្តបច្ចេកទេស
កំណត់ទំហំ និងឯកត្តាផ្ទៃដី:

ha

កំណត់រូបិយប័ណ្ណសម្រាប់ថ្លៃដើម:
  • ដុល្លារ

4.3 សកម្មភាពបង្កើត

សកម្មភាព រយៈពេល​ (រដូវកាល)
1. The plot of land to be planted is prepared by first fertilizing it with a mixture of soil, compost, and/or farmyard manure. The soil is gathered into parallel ridges, typically 20 m long, 1 m wide, and 10–20 cm high; the distance between two ridges is usually 40–50 cm. For many crops the seedlings are spaced 50–70 cm apart.
2. Method #1 Plastic film (approx. thickness 0.014–0.003 mm) is used to cover the ridges and anchored into the ground. Round holes are punched in the film at regular intervals. Some soil is excavated through the holes and the seedlings are planted through the holes and thoroughly watered. The holes in the plastic are sealed using soil.
3. Method#2 Seeds are sown on the ridges and seedlings are allowed to develop. The ridge is covered in plastic film and the film is anchored. Holes are punched into the plastic at the position of the seedlings so that they pass through.
4. For either method, when the crops are harvested all residue should be removed. Depending on local conditions and on whether the plastic film is still viable, the plastic covered ridges can be reused to grow another crop without replacing the film.

4.4 ថ្លៃដើម និងធាតុចូលដែលត្រូវការសម្រាប់ការបង្កើតបច្ចេកទេស

បញ្ជាក់ពីធាតុចូល ឯកតា បរិមាណ ថ្លៃដើមក្នុងមួយឯកតា ថ្លៃធាតុចូលសរុប % នៃថ្លៃដើមដែលចំណាយដោយអ្នកប្រើប្រាស់ដី
កម្លាំងពលកម្ម Preparing land plot persons/day/ha 80,0 3,875 310,0
សម្ភារៈ Spade, secateurs ha 1,0 10,0 10,0
សម្ភារៈ Plastic film kg/ha 48,0 1,0 48,0
សម្ភារៈដាំដុះ Seedlings ha 1,0 250,0 250,0
ថ្លៃដើមសរុបក្នុងការបង្កើតបច្ចេកទេស 618,0
ថ្លៃដើមសរុបក្នុងការបង្កើតបច្ចេកទេសគិតជាដុល្លារ 618,0

4.5 សកម្មភាពថែទាំ

សកម្មភាព ពេលវេលា/ ភាពញឹកញាប់
1. Provide crop support such as staking and removal of excess leaves as required

4.6 កំណត់ថ្លៃដើមសម្រាប់ការថែទាំ/ សកម្មភាពរបស់បច្ចេកទេស (ក្នុងរយៈពេលមួយឆ្នាំ)

បញ្ជាក់ពីធាតុចូល ឯកតា បរិមាណ ថ្លៃដើមក្នុងមួយឯកតា ថ្លៃធាតុចូលសរុប % នៃថ្លៃដើមដែលចំណាយដោយអ្នកប្រើប្រាស់ដី
កម្លាំងពលកម្ម Support the crops persons/day/ha 30,0 3,6668 110,0
សម្ភារៈ Bamboo poles ha 1,0 20,0 20,0
ថ្លៃដើមសរុបសម្រាប់ការថែទាំដំណាំតាមបច្ចេកទេស 130,0
ថ្លៃដើមសរុបសម្រាប់ការថែទាំដំណាំតាមបច្ចេកទេសគិតជាដុល្លារ 130,0

4.7 កត្តាសំខាន់បំផុតដែលមានឥទ្ធិពលដល់ការចំណាយ

ពណ៌នាពីកត្តាប៉ះពាល់ចម្បងៗទៅលើថ្លៃដើម:

This was a demonstration project conducted by ICIMOD.

All costs and amounts are rough estimates by the technicians and authors.

5. លក្ខណៈបរិស្ថានធម្មជាតិ និងមនុស្ស

5.1 អាកាសធាតុ

បរិមាណទឹកភ្លៀងប្រចាំឆ្នាំ
  • < 250 មម
  • 251-500 មម
  • 501-750 មម
  • 751-1,000 មម
  • 1,001-1,500 មម
  • 1,501-2,000 មម
  • 2,001-3,000 មម
  • 3,001-4,000 មម
  • > 4,000 មម
តំបន់កសិអាកាសធាតុ
  • មានភ្លៀងមធ្យម

Thermal climate class: temperate

5.2 សណ្ឋានដី

ជម្រាលជាមធ្យម:
  • រាបស្មើ (0-2%)
  • ជម្រាលតិចតួច (3-5%)
  • មធ្យម (6-10%)
  • ជម្រាលខ្ពស់បន្តិច (11-15%)
  • ទីទួល (16-30%)
  • ទីទួលចោត (31-60%)
  • ទីទួលចោតខ្លាំង (>60%)
ទម្រង់ដី:
  • ខ្ពង់រាប
  • កំពូលភ្នំ
  • ជម្រាលភ្នំ
  • ជម្រាលទួល
  • ជម្រាលជើងភ្នំ
  • បាតជ្រលងភ្នំ
តំបន់តាមរយៈកម្ពស់ :
  • 0-100 ម​
  • 101-500 ម
  • 501-1,000 ម
  • 1,001-1,500 ម
  • 1,501-2,000 ម
  • 2,001-2,500 ម
  • 2,501-3,000 ម
  • 3,001-4,000 ម
  • > 4,000 ម

5.3 ដី

ជម្រៅដីជាមធ្យម:
  • រាក់ខ្លាំង (0-20 សម)
  • រាក់ (21-50 សម)
  • មធ្យម (51-80 សម)
  • ជ្រៅ (81-120 សម)
  • ជ្រៅខ្លាំង (> 120 សម)
វាយនភាពដី (ស្រទាប់លើ):
  • មធ្យម (ល្បាយ, ល្បាប់)
សារធាតុសរីរាង្គនៅស្រទាប់ដីខាងលើ:
  • ខ្ពស់ (>3%)
បើអាចសូមភ្ជាប់ការពណ៌នាពីដីឱ្យបានច្បាស់ ឬព័ត៌មានដែលអាចទទួលបាន ឧ. ប្រភេទដី, pH ដី/ ជាតិអាស៊ីត, សមត្ថភាពផ្លាស់ប្តូរកាចុង, វត្តមាននីត្រូសែន, ភាពប្រៃ ។ល។:

Soil fertility is medium

Soil drainage / infiltration is medium

Soil water storage capacity is medium

5.4 ទឹកដែលអាចទាញមកប្រើប្រាស់បាន និងគុណភាពទឹក

នីវ៉ូទឹកក្រោមដី:

< 5 ម

ទឹកលើដីដែលអាចទាញយកប្រើប្រាស់បាន:

ល្អ

មតិយោបល់ និងលក្ខណៈពិសេសផ្សេងៗទៀតលើគុណភាព និងបរិមាណទឹក​ :

Water quality (untreated): Also for agricultural use (irrigation)

5.5 ជីវៈចម្រុះ

ភាពសម្បូរបែបនៃប្រភេទ:
  • ខ្ពស់

5.6 លក្ខណៈនៃអ្នកប្រើប្រាស់ដីដែលអនុវត្តបច្ចេកទេស

ទីផ្សារនៃប្រព័ន្ធផលិតកម្ម:
  • ពាក់កណ្តាលពាណិជ្ជកម្ម (ផ្គត់ផ្គង់ខ្លួនឯង/ ពាណិជ្ជកម្ម)
ចំណូលក្រៅកសិកម្ម:
  • ច្រើនជាង 50% នៃចំណូល
កម្រិតជីវភាព:
  • មិនល្អ
ឯកជន ឬក្រុម:
  • មានបុគ្គលិក (ក្រុមហ៊ុន, រដ្ឋ)
កម្រិតប្រើប្រាស់គ្រឿងយន្ត:
  • ប្រើកម្លាំងពលកម្ម
  • ប្រើកម្លាំងសត្វ
សូមបញ្ជាក់ពីលក្ខណៈពាក់ព័ន្ធផ្សេងទៀតអំពីអ្នកប្រើប្រាស់ដី:

Population density: < 10 persons/km2

5.7 ទំហំផ្ទៃដីជាមធ្យមនៃដីប្រើប្រាស់ដោយអ្នកប្រើប្រាស់ដី ក្នុងការអនុវត្ត​បច្ចេកទេស

  • < 0.5 ហិកតា
  • 0.5-1 ហិកតា
  • 1-2 ហិកតា
  • 2-5 ហិកតា
  • 5-15 ហិកតា
  • 15-50 ហិកតា
  • 50-100 ហិកតា
  • 100-500 ហិកតា
  • 500-1,000 ហិកតា
  • 1,000-10,000 ហិកតា
  • > 10,000 ហិកតា

5.8 ភាពជាម្ចាស់ដី កម្មសិទ្ធប្រើប្រាស់ដី និងកម្មសិទ្ធប្រើប្រាស់ទឹក

ភាពជាម្ចាស់ដី:
  • រដ្ឋ
កម្មសិទ្ធិប្រើប្រាស់ដី:
  • ជាក្រុម (មានដែនកំណត់)
  • ឯកជន
កម្មសិទ្ធប្រើប្រាស់ទឹក:
  • ឯកជន

5.9 ការប្រើប្រាស់សេវាកម្ម និងហេដ្ឋារចនាសម្ព័ន្ធ

ផ្លូវ និងការដឹកជញ្ជូន:
  • មិនល្អ
  • មធ្យម
  • ល្អ
Labour:
  • មិនល្អ
  • មធ្យម
  • ល្អ

6. ផលប៉ះពាល់ និងការសន្និដ្ឋាន

6.1 ផលប៉ះពាល់ក្នុងបរិវេណអនុវត្តបច្ចេកទេសដែលកើតមាន

ផលប៉ះពាល់លើសេដ្ឋកិច្ចសង្គម

ផលិតផល

ផលិតកម្មដំណាំ

ថយចុះ
កើនឡើង
មតិ​យោបល់/ ការបញ្ជាក់:

in areas with a long winter season

ចំណូល និងថ្លៃដើម

ចំណូលក្នុងកសិដ្ឋាន

ថយចុះ
កើនឡើង
មតិ​យោបល់/ ការបញ្ជាក់:

less time is spent weeding

ផលប៉ះពាល់ទៅលើវប្បធម៌សង្គម

ចំណេះដឹង SLM / ការធ្លាក់ចុះគុណភាពដី

កាត់បន្ថយ
ប្រសើរជាងមុន

livelihood and human well-being

reduced
improved
មតិ​យោបល់/ ការបញ្ជាក់:

improved crops and higher yields benefit the entire community because more food is available and the harvest brings in cash income.

ផលប៉ះពាល់ទៅលើអេកូឡូស៊ី

ដី

សំណើមដី

ថយចុះ
កើនឡើង
ផលប៉ះពាល់ទៅលើអេកូឡូស៊ីផ្សេងៗ

soil erosion and nutrient loss

improved
reduced

soil temperature

decreased
increased

weeds are controlled

reduced
improved

discarded plastic

not biodegradable
biodegradable

6.2 ផលប៉ះពាល់ក្រៅបរិវេណអនុវត្តបច្ចេកទេសដែលកើតមាន

ទឹកជំនន់ខ្សែទឹកខាងក្រោម

កើនឡើង
កាត់បន្ថយ
មតិ​យោបល់/ ការបញ្ជាក់:

Downstream farmers benefit because soil is conserved and runoff is reduced

6.3 ភាពប្រឈម និងភាពរួសនៃបច្ចេកទេសទៅនឹងការប្រែប្រួលអាកាសធាតុ និងគ្រោះអាកាសធាតុ/ គ្រោះមហន្តរាយ (ដែលដឹងដោយអ្នកប្រើប្រាស់ដី)

ផលវិបាកដែលទាក់ទងនឹងបរិយាកាសផ្សេងៗទៀត

ផលវិបាកដែលទាក់ទងនឹងបរិយាកាសផ្សេងៗទៀត
លក្ខណៈឆ្លើយតបនៃបច្ចេកទេសទៅនឹងការប្រែប្រួលអាកាសធាតុ
long spell of low temperature, frost and snowfall ល្អ

6.4 ការវិភាគថ្លៃដើម និងអត្ថប្រយោជន៍

តើផលចំណេញ និងថ្លៃដើមត្រូវបានប្រៀបធៀបគ្នាយ៉ាងដូចម្តេច (ទស្សនៈរបស់អ្នកប្រើប្រាស់ដី)?
រយៈពេលខ្លី:

វិជ្ជមាន

រយៈពេលវែង:

វិជ្ជមានខ្លាំង

តើផលចំណេញ និងការថែទាំ/ ជួសជុលត្រូវបានប្រៀបធៀបគ្នាយ៉ាងដូចម្តេច (ទស្សនៈរបស់អ្នកប្រើប្រាស់ដី)?
រយៈពេលខ្លី:

វិជ្ជមានខ្លាំង

រយៈពេលវែង:

វិជ្ជមានខ្លាំង

6.5 ការទទួលយកបច្ចេកទេស

  • តែមួយករណី /ពិសោធន៍
ក្នុងចំណោមគ្រួសារទាំងអស់ដែលបានអនុវត្តបច្ចេកទេស តើមានប៉ុន្មាន​គ្រួសារ​ដែល​ចង់​ធ្វើ​ដោយ​ខ្លួន​ឯង ដោយមិន​ទទួល​បាន​សម្ភារៈ​លើក​​ទឹកចិត្ត/​ប្រាក់ឧបត្ថម្ភ?​:
  • 0-10%
មតិយោបល់:

There is a moderate trend towards spontaneous adoption of the Technology

Comments on adoption trend: Acceptance/adoption:
This demonstration of plastic film technology was used mainly to show that it is viable both in the mid-hills and at higher elevations where temperatures can be very low during the winter season. Plastic film technology can be used to cultivate high-value horticultural crops such as vegetables, strawberries, and melons. In China, it has been successfully used to cultivate more than 80 species (Lu Rongsen 1994).

Driver for adoption:
Improved income for farmers and less time is spent weeding. Greater awareness among farmers is being spread through participatory research and development in rural areas.

Constraints
Plastic film is not always available in rural areas

6.7 ភាពខ្លាំង/ គុណសម្បត្តិ/ ឱកាសនៃបច្ចេកទេស

ភាពខ្លាំង/ គុណសម្បត្តិ/ ឱកាស​ ទស្សនៈរបស់បុគ្គលសំខាន់ៗ
Plastic film technology can increase the yield of some crops by as much as 100% as compared to conventional farming.

How can they be sustained / enhanced? Since this technology is still relatively new, it will be necessary to continue sharing experiences and to promote awareness.
Plastic film technology can be used to grow crops in hilly areas where the long winter season is usually too cold to support crops.

How can they be sustained / enhanced? Need to create greater awareness of the benefits of using plastic film technology in mountain areas

6.8 ភាពខ្សោយ/ គុណវិបត្តិ/ ហានិភ័យនៃបច្ចេកទេស និងវិធីសាស្ត្រដោះស្រាយ

ភាពខ្សោយ/ គុណវិបត្តិ/ ហានិភ័យ ទស្សនៈរបស់អ្នកចងក្រងឬបុគ្គលសំខាន់ៗ តើបច្ចេកទេសទាំងនោះបានដោះស្រាយបញ្ហាដូចម្តេច?
As farmers begin to use plastic film technology more plastic is being discarded in rural areas. Plastic film needs to be retrieved and recycled. In China it has been shown that this is possible.
Discarded plastic film can pollute agricultural lands Farmers need to be made aware of hazards and encouraged to form networks for collection and recycling the used plastic.

7. ឯកសារយោង និងវេបសាយ

7.1 វិធីសាស្ត្រ/ ប្រភពនៃព័ត៌មាន

7.2 ឯកសារយោងដែលបានចេញផ្សាយ

ចំណងជើង អ្នកនិពន្ធ ឆ្នាំ ISBN:

The application of plastic film technology in China: Plastic film technology data collected and analyzed in ICIMOD D&T Centre, Godavari. Kathmandu, Nepal: ICIMOD, Rongsen, L (1994)

ម៉ូឌុល